Hoover SH40060 User Manual (English)

Questions and Answers:

D
Douglas GentryAug 10, 2025
What to do if my Hoover SH40060 will not run?
- M
  Matthew PadillaAug 10, 2025
  If your Hoover Vacuum Cleaner won't run, it might not be correctly plugged into the electrical outlet. Ensure that the plug is securely pushed into the outlet. Also, the electrical outlet itself may not be working, so check the fuse or breaker in your home and consult an electrician if needed. In some cases, the motor thermostat may have tripped. If this happens, switch off and unplug the vacuum cleaner, then leave it for 30 minutes before switching it back on.
T
Tammy HillAug 16, 2025
Why won’t my Hoover Vacuum Cleaner pick up?
- R
  ramirezreneeAug 16, 2025
  If your Hoover Vacuum Cleaner won’t pick up, the filters may be clogged. The dirt cup could also be full or blocked, or it might be incorrectly installed.
A
Abigail SmithAug 22, 2025
What to do if the power nozzle agitator brushroll won’t run on my Hoover SH40060 Vacuum Cleaner?
- S
  Scott TaylorAug 22, 2025
  If the power nozzle agitator brushroll on your Hoover Vacuum Cleaner won’t run, first ensure the hose power cord is firmly plugged into the receptacle on the cleaner base. A broken or worn belt could also be the cause, so replace the belt if necessary. Also, check that the brushroll switch is set to “ON”. Finally, the Thermal Protector may have activated.
D
Deborah RodriguezAug 28, 2025
What to do if the nozzle won’t pick up on my Hoover SH40060?
- B
  bennettalanAug 28, 2025
  If the nozzle on your Hoover Vacuum Cleaner won’t pick up, there may be a blockage in the nozzle connector, so remove any blockage. Additionally, the agitator brushroll may not be running. The agitator brushroll brushes could also be worn, so replace the brushes.
A
anthony62Sep 3, 2025
Why is dust escaping from my Hoover SH40060 Vacuum Cleaner?
- C
  Carla RichardsonSep 3, 2025
  If dust is escaping from your Hoover Vacuum Cleaner, the filters may not be installed correctly. Refer to the Maintenance section regarding the filters. Also, the dirt cup may be incorrectly installed. Remove the Dirt Cup from the unit by pressing the Dirt Cup Release Button and reattach it to the unit, ensuring it is locked firmly back into place. The filters may also be clogged.