5
1
4
2
5
3
Snap hose clips into place in the front
and back at the bottom of the unit
Insert the power cord wrap in the
back of the unit and wrap cord
around.
Wrap flex hose around unit, starting
in front, and place hose in each clip.
Ensure both tanks are snapped into
a locked position.
Attach the cleaning tool to the end of the
hose and then snap the end of the hose
into the third hose clip located in the
center of the back of the unit.
How to assemble your Spotless Portable Carpet Cleaner:
To Next Page
Loading...
