Hoover Steam Fresh Combi - Operation: Carpet Refreshing & Accessories; Refreshing Carpets; Using Accessories

IMPORTANT: When using on carpets, always make sure the velcro microbre cleaning pad is used and covers the oor head
entirely before using the carpet glider. Only use the carpet glider when refreshing carpets and turn the detergent dial to OFF.
Refreshing carpets
Using accessories
OPERATION
7
To produce steam squeeze
the trigger. To prevent
overly wetting the carpet,
avoid holding the trigger
continuously
Move the steam mop
slowly backwards and
forwards across the carpet
paying particular attention
to high trac areas
To release the carpet
glider, place foot on
clip and push down.
Li steam mop to
unhook and remove
To recline the steam
mop place foot on oor
head and pull handle
backwards
Place foot on outer
oor head and gently pull
away steam mop to release
the compact scrub brush
Move steam mop back and
forwards across the oor,
getting into corners and
awkward places
Turn the detergent dial
to OFF when refreshing
carpets
Place the microbre pad
on the oor white side
facing up. Place steam
mop onto pad making
sure the entire pad
covers the oor head
With microbre pad
attached, hook the steam
mop into the front of the
carpet glider and push to
clip into place. Carpet glider
should only be used when
refreshing carpets
Push On/O button
to switch on
IMPORTANT: Always switch o the steam mop before
attaching or removing the oor head.