The Hoover SteamJet is a versatile steam cleaner designed for various household cleaning tasks, offering both upright and handheld functionality. It is primarily used for deep cleaning and sanitizing different surfaces using steam, eliminating the need for harsh chemicals.
Function Description
The SteamJet operates by heating water to produce steam, which is then used to clean and sanitize surfaces. It can be used as an upright steam mop for hard floors and carpets, or as a handheld steam cleaner for more targeted cleaning of various items and areas. The device is equipped with a Steam Trigger Button (D) to control steam release and an On/Off Button (G) for power. An On Indicator Light (H) shows when the device is powered, while a Steam Ready Indicator Light (Green) (I) signals when the steam is ready for use.
For floor cleaning, it utilizes a Floor Brush (J) and a Floor Head (K), which can be fitted with a Textile Pad (M) for different floor types. The Carpet Glide (N) attachment allows for refreshing carpets. When used as a handheld unit, it can clean various surfaces such as kitchen and bathroom fixtures, tiles, grout, windows, and upholstery. The device includes a Water Tank (L) for filling with water and a Hard Water Filter (O) to prevent mineral buildup, especially in areas with hard water.
Important Technical Specifications
The Hoover SteamJet operates on a 220-240V, 50/60Hz power supply, with a power consumption of 1400-1600W. It is fitted with a 13 amp fuse (UK only). The wiring in the mains power lead is color-coded: Blue for Neutral and Brown for Live. The device is designed for domestic use only and should not be used for commercial cleaning.
Usage Features
Assembling the Cleaner:
- Insert the handle (B) into the main cleaner body (A) until it locks into position.
- Assemble the main body of the cleaner to the floor brush (J).
- Assemble the cleaner with the floor brush to the floor head (K).
Before You Begin Cleaning:
- Remove the clean water tank (L) up and out from the cleaner main body.
- Twist the cap anti-clockwise and remove.
- Fill the clean water tank with cold tap water. Replace cap. Do not add any chemicals, detergents, or perfumes to the clean water tank.
- Re-fit the clean water tank to the cleaner, ensuring the hard water filter (O) is in place.
- Attach a textile pad (M) to the base of the floor head (K). Always unplug the cleaner when adding water or changing a textile pad.
- Wash the textile pad prior to use to remove any lint.
Steam Cleaning Hard Floors:
- Plug the steam cleaner into the main power. The blue ON light (H) will illuminate.
- After a few seconds, the green Steam Ready light (I) will illuminate, indicating the cleaner is ready for use.
- Recline the cleaner by placing a foot on the floor head (K) and lowering the main body towards the floor.
- To produce steam, press the Steam Trigger Button (D).
- Move the cleaner slowly backwards and forwards, paying particular attention to high traffic areas.
Note: Always sweep or vacuum the floor prior to use to remove any loose dirt or debris. Do not use the cleaner without a textile pad attached to the floor head. Do not use the carpet glider when cleaning hard floors.
Steam Cleaning Hard Floor - Intensive Clean:
Use the triangular floor brush (J) on hard floors that require deep cleaning.
- Remove the floor brush from the floor head by pressing the release pedal at the rear. Lift the cleaner with the floor brush attached out of the floor head.
- Plug the steam cleaner into the main power. The blue ON light (H) will illuminate. After a few seconds, the green Steam Ready light (I) will illuminate, indicating the cleaner is ready for use.
- Recline the cleaner by placing a foot on the floor brush and lowering the main body towards the floor.
- To produce steam, press the Steam Trigger Button (D).
- Move the cleaner slowly backwards and forwards, paying particular attention to high traffic areas.
Refreshing Carpets:
- Attach the carpet glider (N) to the floor head (K).
- Plug the steam cleaner into the main power. The blue ON light (H) will illuminate.
- After a few seconds, the green Steam Ready light (I) will illuminate, indicating the cleaner is ready for use.
- Recline the cleaner by placing a foot on the floor head and lowering the main body towards the floor.
- To produce steam, press the Steam Trigger Button (D).
- Move the cleaner slowly backwards and forwards, paying particular attention to high traffic areas.
Emptying the Water Tank:
- Unplug the cleaner from the main power and ensure the unit has cooled.
- Remove the clean water tank (L) for the main body of the cleaner.
- Twist the cap anti-clockwise and remove.
- Empty any excess water from the tank. Replace the cap and return to the cleaner.
Maintenance Features
Removing and Cleaning the Textile Pad:
- Unplug the cleaner from the main power and ensure the unit has cooled.
- If necessary, remove the carpet glider (N), then peel the textile pad (M) from the floor base.
- Wash the textile pad in a washing machine with a mild detergent at max temperature 40°C.
Important: Do not use bleach or fabric softener when washing the textile pad.
Replacing the Hard Water Filter:
The cleaner is fitted with a hard water filter (O). If you live in an area of hard water, the filter will discolour over time. Depending on the water hardness and frequency of use, the filter should be changed every 6 months.
- Unplug the cleaner from the main power and ensure the unit has cooled.
- Remove the clean water tank (L) for the main body of the cleaner.
- Lift the hard water filter (O) out of the cleaner. Replace with new filter.
- Reassemble the clean water tank to your cleaner.
Note: The condition of the filter will affect the cleaner performance.
Important Safety Reminders:
- Always ensure the cleaner is switched off and removed from the plug before cleaning or performing any maintenance task.
- Never immerse the appliance in water or other liquids.
- Do not use direct steam towards equipment containing electrical components.
- Do not spray or pick up flammable liquids, cleaning fluids, aerosols, or their vapours.
- Always ensure the water tank is filled with cold tap water only.
- Regularly check the plug and cord for damage.
- If the cleaner appears to be faulty, it should be repaired by an authorised Hoover service engineer.
Troubleshooting:
- Steam stick will not switch on: Check the unit is plugged in. Check the power cord.
- Steam stick is not producing steam: There may be no water in the clean water tank. The tank may not be fitted correctly.
- Textile pad won't pick up dirt: The cleaning pad may already be saturated with dirt and needs to be washed. Refer to the Maintenance section.
Cleaning FAQs:
- When is steamjet ready? In approximately 30 seconds.
- Can I use steamjet on all floor surfaces? On all hard floors like marble, ceramic, stone, linoleum, sealed hardwood floors, and parquet.
- Does steamjet emit steam automatically? No, to produce steam you should press the steam/sweep trigger button under the handle.
- Can I use it vertically? No, steamjet can be used only on horizontal floor surfaces.
- Can I put detergents or other chemicals inside the tank? No, you would damage the product.
- What if in the city where I live the water is very hard? You can use filtered water or you will have to change the filter cassette more often. If you find very weak steam, check steam orifice, you can descale it by inserting small tools into steam orifice if necessary.
- When is it time to change the filter cassette? How do you notice it? It depends on the water hardness. Normally 6 months. You will notice that the colour of yellow resin inside the filter cassette becomes a bit dull.
- How long will one tank of water last before needing to be refilled? Approximately 20 minutes if you press continuously the trigger.
- Is the mop washable? Yes, it can be washed by hand or in the washing machine with a mild detergent at max temperature 40°C. Do not use bleach or fabric softener.
- How often should I replace the mop? It depends on different factors above all how hard the floor is. The best way to understand when to change the mop is when the mop is still dirty after having washed it or if you notice that it doesn't perform like before.
Consumables:
- Textile Pad: 35601330
- Filter: 35601335
Hoover Service:
Should you require service at any time, please contact your local Hoover Service Office.
Tel: 0844 495 599
Email: customer.services@hoovercandy.com
Hoover has a computerised nationwide service network of over 500 engineers who will quickly respond to your call and guarantee your repair for 12 months.
Quality:
Hoover's factories have been independently assessed for quality. Our products are made using a quality system which meets the requirements of ISO 9001.
The Environment:
This appliance is marked according to the European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The symbol on the product indicates that this product may not be treated as household waste. Instead, it shall be handed over to the applicable collection point for recycling of electrical and electronic equipment. Disposal must be carried out in accordance with the local environmental regulations for waste disposal. For more detailed information about treatment, recovery, and recycling of this product, please contact your local city office, your household waste disposal service, or the shop where you purchased the product.
Your Guarantee:
The guarantee conditions for this appliance are as defined by our representative in the country in which it is sold. Details regarding these conditions can be obtained from the dealer from whom the appliance was purchased. The bill of sale or receipt must be produced when making any claim under the terms of this guarantee. Subject to change without notice.
Need help?
General
To Next Page