Hoover Vortex Pro 5231 - Cleaning & Replacing the Dust Canister Filter; Cleaning & Replacing the Cyclone Filter

14.
1. Press the Handvac Release Button to remove the handvac from the
main body.
2. Press the Dust Canister Release Button to remove the dust canister
from the handvac assembly.
3. To remove the Dust Canister Filter pull the filter strap, as shown. The
filter can now be cleaned or replaced.
NOTE: The dust canister filter is not a washable filter. It is recommended to replace
the filter every 6 months or when the filter is soiled with dirt.
1. Press the Handvac Release Button to remove the handvac from the
main body.
2. Press the Dust Canister Release Button to remove the dust canister
from the handvac assembly.
Cleaning & Replacing the Dust Canister Filter
Maintenance (continued)
Cleaning & Replacing the Cyclone Filter