9
• The steam mop and accessories get very hot during use, always
allow them to cool down before handling.
• Always unplug and switch off the steam mop when assembling.
• Always switch off the steam mop and allow to cool before
emptying the water tank or changing the cleaning pads/
accessories.
• IMPORTANT: Please refer to floor manufacturer’s care
recommendations before use and test the steam mop
on a discrete area of flooring to begin with.
• When using the steam mop, basic safety precautions should
always be observed.
• Don’t aim the steam mop at people, animals, plants and
electrical components such as interior of ovens or wires. Never
touch the steam spray or floor head from a short distance. (There
is a risk of scalding)
• The steam mop is equipped with a thermostat and a thermal cut-
out. If for any reason the steam mop overheats it will switch off. If
this happens turn off and unplug the steam mop, allow to cool for
a least 2 to 4 hours and re-start.
To Next Page
Loading...
