To remove the dust container from
the cleaner, press the bin release
button.
Hold the container over a bin and
push the easy open button placed at
the rear of the dust container.
The dust container door will open and
you can empty with no contact with
dust.
(*Certain models only)
- 4 -
HANDLE STORAGE
IMPORTANT: Do not fill above the MAX level mark
shown on the bin.
!
Remove the hose from the
hose hook, and release the
hose.
Push the handle release button,
then lift the handle assembly
upward.
Insert the tube to the handle
storage holder.
WIPER BLADE ASSEMBLY
IMPORTANT: Switch the cleaner off and remove the plug from the
electricity supply before attempting any maintenance.
1
2
The front wiper blade supplied in
the instruction manual package is
not necessary for normal cleaning.
Fitting the wiper blade will improve the
energy efficiency of the product, but
this can also make the product more
difficult to push and manoeuvre.
If you decide to fit wiper blade,
then grip the side of the wiper
blade and slide along the slot until
the wiper blade is fully located.
To disassemble, lift the end of the
wiper blade and pull it out.
1
2
2
1
REMOVAL AND EMPTYING OF THE
DUST CONTAINER
- 5 -
To Next Page
Loading...
