11
Actual model may vary from images shown.
Brushroll - Bottom plate with screws
Place handle in the low position and turn the cleaner over so
the bottom side is up.
4.17 Remove the 6 screws as shown with a Phillips
screwdriver.
4.18 Pivot off bottom plate.
4.19 Remove any debris and/or hair from brushroll.
Replace the bottom plate aligning the screw holes and
install the 6 screws as shown.
CAUTION
! !
To reduce the risk of injury from moving parts - Unplug
before servicing.
4.17
4.19
4.18
BRUSHROLL: How to Clean
To Next Page
Loading...
