ASSEMBLY
WARNING:
Fully assemble product
prior to use.
1
Insert the handle firmly into the body of the
vacuum.
2
Insert the hose into the hose port. It will click
when secured.
OPERATION
CAUTION:
Not to be used for
grooming a pet.
CAUTION:
Use extra care when
cleaning on stairs. To avoid personal injury
or damage, and to prevent the cleaner from
falling, always place cleaner at the bottom of
the stairs or on the floor. Do not place cleaner
on stairs or furniture, as it may result in injury
or damage. When using tools, always ensure
handle is in the upright position.
SUCTION
1
Push the Power Button to turn ON/OFF.
2
Step on the nozzle and lean the handle back.
USING THE HOSE AND TOOLS
1
Make sure the vacuum is upright and press the
wand release button.
2
Press the handle release button to use the
handle only for above floor cleaning.
3
Attach the desired accessory to the end of the
wand or the handle.
• Turbo Tool
Part #: 440015876
• 2-in-1 Upholstery Tool & Dusting Brush
Part #: 440015873
• Standard Crevice Tool
Part #: 440015874
• LED Crevice Tool
Part #: 440015875
USING YOUR PRODUCT
1
SUCTION
A
B
C
A. Releases handle for above floor cleaning.
B. ON/OFF Power button.
C. Unit will be in Max Suction Power when
turned on.
• To decrease suction power to low mode,
press button once.
• Press and hold to turn brush roll o.
MAINTENANCE
WARNING:
To reduce the risk of
personal injury, unplug before cleaning or
servicing.
This product contains no serviceable parts.
If appliance is not working as it should, has
been dropped, damaged, left outdoors, or
dropped into water, call customer service at
1-800-944-9200 prior to continuing use.
EMPTYING THE DIRT CUP
1
SUCTION
Press the dirt cup release button.
2
Empty over a trach can by pressing the dirt cup
door release.
CLEANING THE EXHAUST FILTER
PART #440015877
1
Tilt the vacuum back, then release the latch to
remove the Exhaust Filter
To Next Page
Loading...
