Hoover zenith - Assembly; Installing and Removing the Battery

7.
IMPORTANT! Always remove the battery from the appliance before fitting or removing accessories.
Assembly
Warnings
Installing and Removing the Battery
1. Insert the battery into the cleaner (as shown) until it clicks into place.
2. To remove the battery, press the Battery Release button and gently
remove.
1. Insert the powerhead into the rod. You will hear a “click” sound
when it is securely in place.
2. Insert the opposite end of the rod into the air inlet of the cleaner.
You will hear a “click” sound when it is securely in place.