Hoover zenith User Manual

8.
Instructions for Use
Continuous Mode
1. The cleaner can be operated without needing to continuously depress
the On/Off Button. To enable Continuous Mode press the Continuous
Mode Switch, as shown, until it clicks into place.
2. To disable Continuous Mode, push the switch in the opposite direction
until it clicks into place.
Attention:
After each use, please ensure that the Continuous Mode Switch is disabled.
Failure to do so may cause battery failure.
It is recommended to charge your product after each use to maintain
maximum performance.
On/Off Button
Press the On/Off Button to turn On or Off the cleaner.
Power Select Button
Your cleaner has two power modes - High Power & Low Power. The cleaner
will begin in High Power. To select Low Power press the Power Select
Button. To return the cleaner to High Power press the Power Select Button
a second time.

Hoover zenith Specifications

General

Brand	Hoover
Model	zenith
Category	Vacuum Cleaner
Language	English