HOPETECH HT9980A - Chapter 8 Test Parameter Setting; 8.1 Test Parameter Description; 8.1 DC Hi-pot Test Interface; 8.2 Insulation Resistance Test Interface

44 pages

To Next Page

To Previous Page

Chapter 8 Test Parameter Setting

8.1 Test Parameter Description

After power-on, the program will automatically enter the parameters set during the last test before

the last shutdown, and the LCD display will show

8.1 DC hi-pot test interface

8.2 Insulation Resistance Test Interface

8.3 Ground Resistance Test interface

Prompt description:

⚫ M01: current test group number

⚫ M01 +: the current test group number and continuous test function are