9
placed in a fixed position and cannot be placed at will.
1.6 Safety Points
⚫ Non-qualified operators and unrelated personnel should stay away from the
high-voltage test area.
⚫ Always be safe and orderly in the high-voltage test area.
⚫ Never touch the test object or any object connected to the test object during the high
voltage test.
⚫ In case of any problems, turn off the high voltage output and input power immediately.
⚫ After the DC withstand voltage and insulation resistance tests, the discharge operation
must be performed before the test wire can be removed.
To Next Page
Loading...