Need help?Do you have a question about the Horizon Fitness Andes 208 and is the answer not in the manual?
General| Brand | Horizon Fitness |
|---|---|
| Model | Andes 208 |
| Category | Fitness Equipment |
| Language | English |
Important safety instructions to be read before using the elliptical for assembly.
Instructions on unpacking the product and preparing the assembly area.
Lists of tools and parts required for assembly, along with an overview diagram.
Connect the stabilizer tube to the main frame using specific bolts.
Slide and attach guide rails into the main frame using specific bolts.
Assemble the console mast, route wires, and attach it to the main frame.
Attach pedal arms to the crank arms with washers and nuts, then add covers.
Mount upper and lower handlebars to the console mast, securing with bolts and screws.
Install the rocker-arm assembly onto the pedal arm axle using washers and a bolt.
Tuck console wires into the mast and attach the console using pre-installed screws.
Mount the bottle holder, connect the AC adaptor, and power on the console.
To Next Page
