Horizon Fitness HT5.0 User Manual (English)

Questions and Answers:

C
Christina WardAug 12, 2025
What to do if the console lights up but the Distance/Watts/RPMs do not count on my Horizon Fitness Equipment?
- R
  ryan50Aug 12, 2025
  If the console on your Horizon Fitness Equipment lights up, but the Distance, Watts, or RPMs aren't counting, try these steps: First, unplug the power cord. Then, remove the console and check all connections to make sure they are secure and not damaged. Unplug and reconnect the console cable. If the issue persists, the speed sensor or magnet may be dislodged or damaged.
M
Mandy RamosAug 22, 2025
How to fix a console that does not light up on Horizon Fitness Equipment?
- A
  Amanda PrattAug 22, 2025
  If the console on your Horizon Fitness Equipment does not light up, verify the following: * Ensure the outlet the machine is plugged into is functional. * Double-check that the breaker hasn't tripped. * Confirm the correct power cord is being used (only use the one included) and test its voltage to ensure it provides the specified output voltage from the label. * Make sure the power cord isn't pinched or damaged and is properly plugged into both the outlet and the machine. * Unplug the power cord, remove the console, and check that all connections to the console are secure and not damaged. Unplug and reconnect the console cable.
M
Monica HerreraAug 30, 2025
What to do if resistance levels seem incorrect on Horizon Fitness Equipment?
- W
  William HarrisAug 30, 2025
  If the resistance levels on your Horizon Fitness Equipment seem incorrect (either too hard or too easy), reset the console and allow the resistance to reset to the default position. Then, restart the equipment and retry the resistance levels.