Horizon Hobby E-flite Fw 190A 1.5m User Manual (English)

Questions and Answers:

A
Ann ClarkJul 28, 2025
Why is my Horizon Hobby Toy oscillating?
- H
  hallwhitneyJul 28, 2025
  If your Horizon Hobby Toy is oscillating, several factors could be the cause. A damaged or imbalanced propeller or spinner can cause this issue, so replacing or balancing them is advisable. Motor vibration can also be a culprit; consider replacing parts, correctly aligning them, and tightening fasteners. Check if the receiver is loose and align and secure it in the fuselage. Loose aircraft controls should be tightened or secured, including servos, arms, linkages, horns, and control surfaces. Worn parts, especially the propeller, spinner, or servo, should be replaced. Finally, irregular servo movement indicates the servo should be replaced.
R
Ruben KempAug 7, 2025
What to do if Horizon Hobby Toy has inconsistent flight performance?
- J
  Judy WhiteAug 7, 2025
  Inconsistent flight performance in your Horizon Hobby Toy can stem from a few key issues. First, ensure that the trim is at neutral; if you've adjusted it more than 8 clicks, adjust the clevis to remove trim. Sub-Trim is not allowed, so adjust the servo linkage instead. Also, make sure the aircraft remains immobile for 5 seconds after connecting the battery.
T
Tina GutierrezAug 16, 2025
What to do if Horizon Hobby Toy has incorrect response to the AS3X Control Direction Test?
- A
  aprillopezAug 17, 2025
  If your Horizon Hobby Toy shows an incorrect response to the AS3X Control Direction Test, do not fly it. This issue is caused by incorrect direction settings in the receiver, which can lead to a crash. You must correct the direction settings before flying.