What to do if my Horizon Hobby Spektrum SMART ESC motor stops and the LED blinks?
If the motor stops and the LED blinks, it could be due to a few reasons: * **Low voltage protection:** Recharge or replace the battery. * **Overheat protection:** Let the motor/ESC cool down and consider changing the setup or gearing to prevent overheating. * **Battery issue:** Repair any damaged wiring or replace the battery.
Why my Horizon Hobby Receiver has no motor function, audible tone, or LED when ESC is ON?
If there is no motor function, audible tone, or LED when the ESC is on, here are a few potential causes: * **Battery/connection issue:** Recharge or replace the battery and ensure all connections are secure. * **Damaged ESC/switch:** Repair or replace the ESC switch or the ESC. * **Damaged motor:** Repair or replace the motor.
How to fix a Horizon Hobby Spektrum SMART ESC that does not turn continuously in response to throttle?
If the receiver does not turn continuously in response to the throttle, it may be due to damaged ESC or motor. Repair or replace the wiring, motor, or ESC.
General| Brand | Horizon Hobby |
|---|---|
| Model | Spektrum SMART ESC |
| Category | Receiver |
| Language | English |
Defines terms like WARNING, CAUTION, and NOTICE for potential harm levels.
Read the ENTIRE instruction manual to become familiar with product features before operating.
Product is not for children under 14 years; it is not a toy.
Product is only for unmanned, hobby-grade, RC vehicles and aircraft.
Read wet conditions maintenance procedures and ensure tools are ready.
Gently rinse mud/dirt, remove battery, dry contacts, use compressed air, air dry.
ESC/receiver combo compatible with Spektrum DSM2/DSMR, includes SMART telemetry.
Notices regarding battery disconnection and receiver battery connection.
Mount ESC/Receiver, connect wiring, secure components, and ensure airflow.
Steps to bind the receiver to the transmitter for initial connection.
Procedure to calibrate the ESC and transmitter throttle range.
Steps for powering on the transmitter and receiver for use.
Description of what happens when the radio link is lost during use.
Identification of receiver and ESC programming/update ports.
Procedure for changing ESC settings using a programming card.
Steps to update the receiver firmware using a PC and programming cable.
Explanation of LED status lights and motor sounds for ESC feedback.
Solutions for common problems related to receiver connectivity and response.
Solutions for issues with telemetry data display and availability.
Solutions for common ESC malfunctions like no motor function or overheating.
Details on what the 1-year limited warranty covers for defects in materials and workmanship.
List of conditions and damages not covered by the product warranty.
The customer's sole recourse for defective products is service or replacement.
Disclaims liability for indirect, incidental, or consequential damages.
Guidance on how to contact Horizon Hobby for support and service.
Process for submitting products for inspection, service, or obtaining an RMA number.
Proof of purchase and adherence to warranty conditions are necessary for claims.
Information regarding service for products not covered by warranty and compliance.
Contact details for Horizon Hobby's service center, product support, and sales.
Declaration of Conformity and FCC ID for the product's radio frequency compliance.
Regulatory compliance statements and IC ID for Canadian market.
EU Declaration of Conformity and RED/EMC Directive compliance for the product.
Guidelines for the environmentally sound disposal of electronic waste.
To Next Page