EasyManua.ls Logo

Horn Tools Log Splitter User Manual

Horn Tools Log Splitter
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Manual
LOG SPLITTER
HORN TOOLS
Stöckenstr. 12-14 . 6850 Dornbirn . AUSTRIA
email: office@horntools.com
UID: ATU59720608
Question and Answer IconNeed help?

Do you have a question about the Horn Tools Log Splitter and is the answer not in the manual?

Horn Tools Log Splitter Specifications

General IconGeneral
BrandHorn Tools
ModelLog Splitter
CategoryLog Splitter
LanguageEnglish

Summary

Explanation of Warning Symbols

Operational Hazards

Warnings about cutting, crushing, log pusher, and jammed log removal.

General Safety Instructions

Operational Safety Practices

Hand safety, blade protection, substance use, hazardous areas, and fire prevention.

Electrical Safety

Power and Grounding

Ensure circuit is fused, power/voltage/frequency match, and supply is earthed.

Circuit Breaker and Wiring

Use residual-current circuit breaker; ensure 5-wire connection and appropriate cable type.

Assembly and Preparation

Assembly Steps

Startup Procedures

Application and Operation

Pre-Operation Checks

Steps like opening vent plug, greasing, checking motor direction, and idling.

Splitting Blade Adjustment

How to set the splitting blade position and stroke adjustment.

Log Splitting Technique

Placing logs, splitting along grain, and using levers correctly.

Maintenance and Care

Hydraulic Oil Change

Procedure for changing hydraulic oil and recommended oil grades.

Changing the Oil Filter

Cleaning and Sharpening Sliding Surfaces

Specifications

Troubleshooting and Fault Clearance

Problem Resolution Guide

A table outlining common problems, their causes, and recommended remedies.