9
Operation
Once you have your comb and cutter set up (explained in pages
4 - 6) you are ready to plug in and shear.
The transformer can either be hung up via the leather strap
on the back or can be sat on a solid, dry surface. Locate the
handpiece’s power cable and plug this into the transformer.
Ensuring the wall plug and the handpiece are switched o, plug
the transformer into the wall.
Holding the Rambo handpiece, switch the wall plug on and then
switch the handpiece on via the switch located on the back of
the handpiece.
RAMBO MAINS
To Next Page
Loading...