To Next PageTo Next PageWhy is there mud/dirt building up on the idlers/mid-rollers of my horsch Maestro SW 3115?
Mud or dirt buildup on the idlers or mid-rollers is caused by operation in muddy, wet, or sticky soil types. Clean the mud and dirt regularly to prevent track damage.
What to do if I notice uneven tread wear on my horsch Maestro SW 3115?
If you observe uneven tread wear, it may be due to a high amount of roading. Try swapping the tracks from side to side.
What to do if the temperature of the idler or roller axle hub is high in my horsch Tractor Accessories?
A high temperature in the idler or roller axle hub can be caused by bearing failure or a lack of lubricant. Replace the damaged bearing or check the oil level in the reservoir.
What to do if I hear noise from the idler or roller axle hub of my horsch Maestro SW 3115?
Noise from the idler or roller axle hub is likely due to bearing failure. Replace the damaged bearing.
What to do if splits/opening appear on the side or top of tread of horsch Tractor Accessories?
Splits or openings on the side or top of the tread can be caused by a high amount of roading or overheating of the tread. Try swapping the tracks from side to side, and replace the tracks if necessary.
What to do if I see chunking on guide lug sides of horsch Maestro SW 3115 Tractor Accessories?
Chunking on the guide lug sides can occur if the track is not aligned properly, due to improper break-in, or side slope operation. * Align the track. * Operate in dry dusty conditions.
What to do if there is breakaway of track guide lugs in horsch Maestro SW 3115?
If there is breakaway of track guide lugs due to debris or material ingestion into the track system, clean the material off of the drive wheel.
What to do if system dog tracking or problems with track alignment occur in horsch Maestro SW 3115 Tractor Accessories?
System dog tracking or problems with track alignment can occur if the alignment adjustment is incorrect or the undercarriages parallelism is out of tolerance. Adjust alignment per procedures.
Identification and explanation of safety symbols and general warnings for hazard awareness.
Guidelines for safe operation, including precautions for tractor, bystanders, and machine components.
Step-by-step instructions for folding and unfolding the machine using the E-Manager.
Details on metering unit components, disk selection, and kit contents for various seed types.
Guide to meter disc settings, adjustments, wear inspection, and configurations for optimal seed placement.
Calibration procedures, troubleshooting common faults, and adjustments for seed placement accuracy.
Guide to common track system problems, their causes, and recommended solutions.
Guide to common machine problems, troubleshooting, and bolt tightening torque specifications.
General| Brand | horsch |
|---|---|
| Model | Maestro SW 3115 |
| Category | Tractor Accessories |
| Language | English |
