Need help?Do you have a question about the Horus Mini and is the answer not in the manual?
General| Category | 3D Scanner |
|---|---|
| Camera resolution | 1.3 MP |
| Point distance | 0.05 mm |
| Data format | PLY, OBJ, STL |
| Communication | USB 3.0 |
| Compatibility | Windows |
Introduces the HORUS instrument and its features for ROTAX engines.
Location of the SD card slot on the instrument.
Identifies the button used for menu navigation.
Shows the 9-pin connector for sensor and power input.
Displays the primary screen showing engine RPM and status icons.
Shows engine parameters like CHT, oil temp, and oil pressure.
Displays voltage and fuel level percentage.
Shows total flight hours and last flight duration.
Illustrates the screen for adjusting fuel gauge thresholds.
Explains how the instrument records and displays maximum parameter values.
Details how to navigate through menus using the menu button.
Explains RPM measurement, range, and color scale for ROTAX engines.
Describes CHT sensor, range, and color scale for ROTAX engines.
Details oil temperature measurement, range, and color scale for ROTAX engines.
Explains onboard voltage measurement, range, and color scale.
Covers oil pressure sensor types, range, and color scale for ROTAX engines.
Explains how the instrument records engine running hours and flight duration.
Describes fuel gauge types, range, and color scale, including warnings.
Details the pinout, color, and sensor for the SUB-D9 connector.
To Next Page