FERTILIZER
ADJUSTMENT KNOB
PROPORTIONING CAP
STEP
Add the fully concentrated product and select the
appropriate cap seing based on the manufacturers
recommended coverage rate. Products do not require
dilution or premixing unless using a Flo-Disc or the
manufacturer’s recommendation.
STEP
Fill the tank with water until all air is out of the tank. The
system will mix the products automatically when the water
is turned on.
STEP
Screw cap onto the tank and connect tubing to the cap and
Hose Bib Adapter. Cap and tubing connections are color
coordinated,connect blue to blue and green to green. The
tubing slides over the connectors on the Hose Bib Adapter
and into the connector on the cap.
STEP
Set the flow adjustment on the proportioning cap to Fast
Feed for quick feeding and to Slow Feed to feed slowly every
time you water. You can also feed at these approximate
rates (rates will vary due to product variations)
Slow 1000:1 2/3 tsp. per gallon
#1 500:1 1 1/3 tsp. per gallon
#2 250:1 1 Tbsp. per gallon
Fast 100:1 2 Tbsp. per gallon
TO REFILL
Shut o pressure to tank, remove tubing from the cap,
remove cap from the tanks, pour the water out of the tank
and go to step one above.
TYPICAL COVERAGE RATES
Water Soluble Products - 1 lb per 1000 sq. .
Liquid Products - 2 cups per 1000 sq. .
Hoss Tools does not provide application recommendations for products
not listed on the Hoss Tools website.
IMPORTANT:
The fertilizers sold by Hoss Tools are approved to be
used in the Injector System due to their Greenhouse
Quality. Not all fertilizers meet the same specifications
and should be inspected thoroughly for quality before
using in your injection system.
1 Gallon Liquid / 8 Pounds Dry Capacity
HOSS RECOMMENDED FERTILIZERS
FOR TUTORIALS, DEMONSTRATIONS, AND EXPERT GARDENING TIPS, FOLLOW US ON SOCIAL MEDIA!
HOSSTOOLS
YOUTUBE.COM/HOSSGARDENTOOLS HOSSGARDENTOOLS @GARDENINGWITHHOSS
6
ADDING FERTILIZER & FEEDING SETTINGS
To Next Page
Loading...