EasyManua.ls Logo

Hot Spot TEMP User Manual

Default Icon
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Hot Spot Spa Pre-Delivery Instructions
Pre-Delivery Instructions
Please take the time to read this booklet carefully, as it will provide you with the information you will need to ensure
the safe, secure, and timely installation of your new spa. The following sections are guidelines on how to prepare for
delivery and set-up of your new spa. Specifically covered are site selection, delivery access, ground preparation, and
electrical requirements.
Remember to carefully read the Owners Manual that accompanies your spa, and to complete the warranty register
within 10 days of delivery. These items, along with other valuable information, will be found in the Owner’s Package
which has been placed in the equipment compartment of your spa, where you will also find its serial number.
Watkins Manufacturing Corporation reserves the right to change features, specifications and design without
notification and without incurring any obligation.
DATE PURCHASED: _________________________________________________________________
DATE INSTALLED: ___________________________________________________________________
DEALER: ___________________________________________________________________________
ADDRESS: __________________________________________________________________________
TELEPHONE: _______________________________________________________________________
In most cities and counties, permits will be required for the installation of electrical circuits or the construction of
exterior surfaces (decks and gazebos). In addition, some communities have adopted residential barrier codes which
may require fencing and/or self-closing gates on the property to prevent unsupervised access to a pool (or spa) by
children under 5 years of age. Your Hot Spot spa is equipped with a locking cover that meets the ASTM F1346-91
Standard for Safety Covers and as a result, is usually exempt from most barrier requirements. As a general practice,
your local Building Department will inform you of any applicable barrier requirements at the time a permit is obtained
for the installation of an electrical circuit. Your Hot Spot dealer can provide information on which permits may be
required.
Congratulations on your decision to enjoy the finest spa available...
Welcome to the growing family of Hot Spot
®
Spa owners.
Question and Answer IconNeed help?

Do you have a question about the Hot Spot TEMP and is the answer not in the manual?

Hot Spot TEMP Specifications

General IconGeneral
BrandHot Spot
ModelTEMP
CategoryHot Tub
LanguageEnglish

Summary

Site Selection and Preparation

Outdoor and Patio Installation

Deck Installation

Indoor Installation

Delivery Access

Ground Preparation

Tempo Dimensions

Relay Dimensions

Sprint Dimensions

Dash Dimensions

Electrical Requirements

Selecting the Voltage for Your Spa

Guide to selecting the correct voltage for your spa model and its implications for heating.

Standard, Cord-Connected 115 Volt 20 Amp Configuration

Details for a 115-volt, 20-amp GFCI-protected configuration, including outlet placement.

115 Volt Electrical Requirements

Specifics for a 115-volt dedicated circuit, including breaker size, wire gauge, and polarity.

115 Volt 30 Amp Conversion (Dash™™ Spa Model)

230 Volt Installation (Tempo™™, Relay™™ & Sprint™™ Spa Models)

Spa Specifications

Related product manuals