HOTA F6 - Working parameters Display

Standby
CH1
Standby
CH2
LiPo-�sCHG
CH4
LiPo-�sCHG
CH3
23.44
V
29.1V
23.44
V
29.1V
2.0
A
24.4V/45W
3.8
A
23.3V/85W
Working parameters Display
Operation and Setup
Split Screen Display
08
F6 4-Channel DC Smart Charger
Current
channel
Current
channel
Electric current
of current task
Output voltage
/power
Electric current
of current task
Output voltage
/power
Electric current
of current task
Output voltage
/power
Electric current
of current task
Output voltage
/power
Battery
parameters
Battery
parameters
Channel 1,2 : Standby Channel 3,4 : Charging status
Task status
Task status
Split-Screen Display : Simple Operation
1. Boot into the Split-screen display ----- Standby state;
2. In the standby state,long press the speed shuttle key to enter "Charger
Settings" ;
3. Short press CH key to display the channel you choose;
4. Long press the CH key to stop the current task of double channels .