HOTA F6+ - 8 Task Settings 2

F6+ 4-Channel DC Smart Charger
22
Task Settings
Operation and Setup
Select task options: Power supply , charging , discharge, external discharge, storage,
balance, regenerative discharge ,combined charging
Select battery types: Smart battery, LiHV, LiPo, Lilon, LiFe, LiXX, NiZn, Pb,
NiCd, NiMH, Eneloop
Fine-tuning the End-voltage
Select battery's strings: 1~6S ; if balance port is inserted, it is automatically tested, no
need to do any settings
Select current, charging/storage 0.1~ 15.0A, discharge 0.1 ~ 3.0A , external discharge
1.0~ 15.0 A
Start to execute task
Back
Select Task
Battery Type
Cell Voltage
Cell Count
Current Setting
Start Task
Back
Select Task
Battery Type
Cell Count
Cell Voltage
Current Settings
Start Task
Task Settings
Charging
LiPo
4.20V
6S(22.2V)
1.0A
Back
Connect power supply to the charger, wait for the system to complete its Self-checking. In
standby interface , connect the battery to the charger , then after selecting the corresponding
channel , short press the speed shuttle key to pop up the "Task Setting" menu .