2
NOTE: YOUR UNIT MUST BE INSTALLED BY A
QUALIFIED FURNACE INSTALLER.
You've purchased one of America's Finest Coal Burning Furnaces. By heating with
coal you're helping CONSERVE AMERICA'S ENERGY!
CONGRATULATIONS!
TOOLS AND MATERIALS NEEDED
TOOLS
• Pencil
• 6 Foot Folding Rule or Tape
• Tin Snips
• Drill, Hand or Electric
• Drill Bit- 1/8" Dia.
• (For Sheet Metal Screws)
• Screw Driver (Blade-Type)
• Gloves
• Sabre Saw
• 5/16" Nut Driver or
• 5/16" Socket W/Ratchet
• Safety Glasses
MATERIAL
• 6" Pipe, 6" Elbow, Collar and Thimble;
• as required (24 gauge min.)
• 1/2" Sheet Metal Screws
• 6" Inside diameter Listed Residential
• Type or Building Heating Appliance
• Chimney or existing masonry chimney
• Electrical Wiring
• 6" Draft Regulator
• 1/2" Conduit (Conduit Connectors)
• Furnace Cement (Manufacturer
• Recommends: Rutland Black-Code 78
• or Equivalent)
• Plenum and Duct work as required.
Note: Register your product on line at www.usstove.com. See “Limited Warranty” section for specic
warranty information for your new purchase. Save your receipt with your records for any claims.
To Next Page