Hotone Ampero Control User Manual

Ampero Control offers four footswitch modes:
- Single: Send same MIDI message (s) when you press the
footswitch. MIDI message (s) will be sent when the footswitch
is released.
- Toggle: You can set two different (A/B) groups of MIDI
message (s). Press the footswitch repeatedly to send MIDI
messages toggling between A/B message groups. MIDI
message (s) will be sent when the footswitch is released.
- Momentary: You can set two different (A/B) groups of MIDI
message (s). Press the footswitch to send MIDI message (s) in
group A, release the footswitch to send MIDI message (s) in
group B.
- Hold: Hold the footswitch to send one MIDI message or a
group of messages repeatedly at regular intervals. You can send
the first MIDI message once in the group by single press the
footswitch. If so, the MIDI message will be sent when the
footswitch is released.

Hotone Ampero Control Specifications

General

Type	MIDI Foot Controller
Footswitches	4
Connectivity	MIDI, USB
Expression Pedal Inputs	2
USB	USB Type-C
Display	LCD
Power Supply	9V DC
MIDI I/O	In/Out
Weight	1.18 kg