To Next PageTo Next Page
Need help?Do you have a question about the Hotone AMPERO II STAGE and is the answer not in the manual?
General| Type | Multi-effects processor |
|---|---|
| USB | Yes |
| Impulse Response Support | Yes |
| Input Impedance | 1 MΩ |
| Output Impedance | 100 Ω |
| Modeling Technology | Digital modeling |
| Effects Types | Distortion, Modulation, Delay, Reverb |
| Effects | Multiple effects including amp simulation, modulation, delay, reverb, etc. |
| Amp Models | 30+ |
| Cabinet Models | 30+ |
| Looper | Yes, with up to 60 seconds of recording time |
| MIDI | MIDI In/Out |
| Computer Connectivity | Yes (USB) |
| IR Loading | Yes (via USB) |
| Expression Pedal | Yes |
| Display | Color LCD |
| Power Source | DC 9V power supply |
General safety, intended use, and power supply guidelines.
Precautions on water, fire, EM fields, and hearing loss.
Guidance on device placement, maintenance, and operation.
Steps for malfunctions and product/packaging disposal.
Battery disposal regulations and service contact information.
Guide to editing and saving custom patches.
Overview of signal flow and the FX Chain View.
Explains parallel, split-mix, Y-A/B, A/B-Y, and serial chain configurations.
Describes input, output, split, and mixer nodes.
Explains effect slots, available modules, and their categories.
Configuring input sources and channels.
Describes empty, off, and on states for effect slots.
Setting input signal source and channel selection.
Setting input signal source and channel selection.
Defining signal output destinations and levels.
Configuring split and mixer nodes for signal routing.
Loading and saving effects chain templates.
Adding, moving, copying, pasting, and deleting modules.
Adjusting effect parameters and switching effects.
Browsing and selecting effects from categories.
Setting effect tempo via tapping and tap divide options.
Understanding DSP power limits and overload indications.
Setting up and using the unit's FX loop jacks.
Details on FX SND, FX RTN, and FX LOOP modules.
Configuring FX loops in serial or parallel configurations.
Adjusting patch tempo and volume levels.
Utilizing scenes for effect switching and parameter combinations.
Setting footswitch functions, quick access, and expression pedals.
