Need help?Do you have a question about the Hotone BINARY and is the answer not in the manual?
This update adds time subdivisions for Tap Tempo mode.
Step-by-step guide for updating the Binary Mod firmware using the Binary Editor.
Instructions for manual updates and important notes for successful firmware installation.
The document describes the Hotone Binary Mod, a device that receives firmware updates to enhance its features and user experience. The firmware update V1.1.2 specifically introduces new functionalities and improvements based on customer feedback, with a primary focus on adding time subdivisions for the Tap Tempo mode.
The core function of the Binary Mod, as highlighted by this update, involves modulating effects with precise timing control. The Tap Tempo mode allows users to set the tempo of the effect by tapping, and with the V1.1.2 firmware, this functionality is significantly expanded through the introduction of subdivisions. This means users can now specify not just the tempo, but also how that tempo is divided, offering a much finer degree of control over the rhythmic aspects of the modulation.
To use the Tap Tempo Subdivision feature, users need to hold the PATCH/TAP footswitch to engage Tap Tempo mode when the effect is active. Once in this mode, the RATE knob becomes the control for setting the desired tap tempo subdivision. The manual provides a comprehensive table detailing the available subdivisions, their corresponding divide ratios, and how they are displayed on the device. For instance, users can select subdivisions like Whole Note (1), Half Note (1/2), Dotted Half Note (1/2D), Half Note Triplet (1/2T), Quarter Note (1/4), Dotted Quarter Note (1/4D), Quarter Note Triplet (1/4T), 8th Note (1/8), Dotted 8th Note (1/8D), 8th Note Triplet (1/8T), and 16th Note (1/16). The default division is Quarter Note (1/4, no division), and disengaging the Tap Tempo function will reset the subdivision to this default setting. This granular control over timing is a significant enhancement for musicians who require precise rhythmic synchronization for their effects.
The document also provides detailed instructions on how to update the Binary Mod's firmware, which is crucial for accessing these new features and improvements. The update process involves several steps, starting with visiting the official Hotone website's Support page to download the latest Binary Editor installer and Binary Firmware. It's important to install Binary Editor v1.1.0 first, even if an older version is present, as it doesn't require uninstallation of previous versions. After installation, users run the Binary Editor Software, click a specific button at the top right of the UI, then select "Firmware Update," choose the downloaded firmware file, confirm, and finally click the "Firmware Update" icon to initiate the update.
In addition to the standard update procedure, the manual outlines a "Firmware Update Notice" for performing a manual update in case the Binary pedal crashes. This recovery process involves a specific sequence of button presses: holding the ▼ footswitch along with the “-” and “GLOBAL” buttons while powering the Binary Mod on. After connecting a USB cable to the computer and opening the Binary software, users can select the firmware update option and follow the procedure. It's recommended to run "Restore Factory Settings" from the software after a successful update to ensure optimal performance. Finally, users should disconnect the cable and operate the Binary as normal.
Maintenance features are also touched upon within the update instructions. Users are advised to close anti-virus software or disable disk scan functions before using Binary Editor with Binary, as these can potentially cause the editor to crash. This suggests that the update process can be sensitive to background processes on the computer. Furthermore, if the device is not recognized by the computer, a troubleshooting step is provided: reconnecting both the power cable and USB cable. These tips are essential for ensuring a smooth update process and maintaining the device's functionality.
Overall, the Hotone Binary Mod, with its V1.1.2 firmware, is presented as a versatile modulation device that prioritizes user feedback for continuous improvement. The enhanced Tap Tempo Subdivision feature offers musicians advanced rhythmic control, while the clear update and troubleshooting instructions ensure that users can easily access and benefit from these improvements, thereby maintaining the device's performance and extending its utility. The emphasis on precise timing and user-friendly update procedures underscores Hotone's commitment to delivering a high-quality and adaptable product.
General| MIDI | No |
|---|---|
| Bypass | True Bypass |
| Input | 1/4" Mono Jack |
| Power Supply | 9V DC power adapter (center negative) |
| Input Impedance | 1M Ohms |
| Output Impedance | 100 Ohms |
| Power Source | 9V DC adapter (included) |
To Next Page
