Need help?Do you have a question about the Hotone Binary Eko and is the answer not in the manual?
General| Type | Delay |
|---|---|
| Effects | Digital Delay |
| Tap Tempo | Yes |
| Current Draw | 100mA |
| Input Impedance | 1MΩ |
| Controls | Time, Feedback, Mix, Tap |
| Feedback | 0 - 100% |
| Mix | 0 - 100% |
| Power Supply | 9V DC |
| Output Impedance | 100 Ohms |
Utilizes CDCM modeling system for realistic playing experience via dual-DSP.
Includes a tap tempo function with tap divide for precise tempo setting.
Features stereo I/Os, EXP jack for expression pedal, and USB for updates.
Boasts 24-bit A/D/A conversion and up to 110dB S/N ratio for excellent sound.
Details the ON/OFF, PATCH/TAP, and SAVE/EXIT footswitch operations.
Explains the function of MIX, A, B, F.BACK, and TIME knobs.
Describes the INPUT, EXP, OUTPUT (L/R), and USB jacks for connectivity.
Illustrates how to connect the pedal with instruments, amps, and other devices.
Explains the elements on the main display: bank/patch number, expression pedal parameter, and current effect.
Details how to switch between patches using the PATCH footswitch.
Explains how to cycle through banks using both footswitches simultaneously.
Describes how to engage and set the tempo speed using the PATCH/TAP footswitch.
Lists available tempo subdivisions and their corresponding divide ratios and display values.
Explains how to cycle through input mode, max delay time, expression pedal, and trail settings.
Details how to use +/- buttons to set parameters and SAVE/EXIT to confirm.
Describes how to adjust current and previous parameter values using onboard knobs and +/- buttons.
Explains how to use the +/- buttons to change to different effects and indicates edited patches.
Details how to set the expression pedal to control parameters like TIME, MIX, or F.BACK.
Describes how to activate the save function by holding the SAVE/EXIT button.
Explains confirming saving with SAVE/EXIT or cancelling with PATCH/TAP.
Details how to select between MONO and STEREO input modes using the GLOBAL button.
Explains how to adjust the maximum delay time from 1000ms to 4000ms.
Describes the Trail setting which affects delay repeats after bypassing the effect.
Details how to set the minimum/maximum values for the expression pedal range from 000 to 100.
Explains how to initiate expression pedal calibration by pressing the GLOBAL button six times.
Guides on setting the heel position for the expression pedal calibration.
Guides on setting the toe position for the expression pedal calibration.
Describes the 'CALIBRATION COMPLETE' message and re-calibration if needed.
Provides a list of all available effect models with their descriptions and parameters.
Lists technical details including number of effects, patches, delay time, processing, and dimensions.
To Next Page
