Hotone Binary Eko User Manual

DESIGN INSPIRAT I O N
Global
Press the GLOBAL button repeatedly to cycle through input mode, max delay time, expression pedal, trail settings and
firmware version info:
Use the +/- buttons to set the parameters, press the SAVE/EXIT button (or wait for 5 seconds without any operation) to
confirm settings and exit to the main display.
Note: 1. There is no parameter in firmware info display.
2. To check firmware version on your Binary Eko, you need to update to firmware v1.1.1 or later.

Hotone Binary Eko Specifications

General

Brand	Hotone
Model	Binary Eko
Category	Music Pedal
Language	English