Need help?Do you have a question about the Hotone Binary Amp and is the answer not in the manual?
General| Technology | Digital |
|---|---|
| Number of amps | 2 |
| Current Draw | 200mA |
| Input Impedance | 1MΩ |
| Frequency Response | 20Hz - 20kHz |
| Signal to Noise Ratio | > 90dB |
| Inputs | 1 x 1/4" (Instrument) |
| Power Source | DC 9V |
| Output Impedance | 100 Ohms |
| Controls | Gain, Tone |
| Outputs | 1 x 1/4" Mono |
| Power | 9V |
Details the layout of knobs, buttons, and jacks on the Binary Amp panel, explaining their functions.
Provides important notes for connecting the amp, including power-on/off order and signal clipping.
Explains the indicators on the main display, including patch numbers and cab sim status.
To Next Page
