How to fix a Hotpoint Ariston LFT 114 Dishwasher that does not start?
If your Hotpoint Ariston dishwasher isn't starting, there might be a few reasons: * Ensure the plug is correctly inserted into the electrical socket and that there is power in the house. * Make sure the dishwasher door is fully closed. * Check if a delayed start has been programmed.
What to do if no water drains out from my Hotpoint Ariston LFT 114?
If water isn't draining from your Hotpoint Ariston dishwasher, check these items: * Confirm that the dishwasher cycle has finished. * Inspect the water outlet hose for any bends. * Check for any blockages in the drain duct. * Ensure the filter isn't clogged with food residues.
Why are my dishes not clean after using my Hotpoint Ariston LFT 114 Dishwasher?
If your dishes aren't coming out clean from your Hotpoint Ariston dishwasher, consider the following: * Avoid overloading the racks and ensure proper arrangement of crockery. * Make sure the sprayer arms can move freely. * Select an appropriate wash cycle. * Ensure you are using the correct amount of suitable detergent, without producing excessive foam. * Check that the lid on the rinse aid compartment is correctly shut. * Inspect and clean the filter if it's dirty or blocked. * Verify the refined salt level.
Why are my dishes covered in white film after washing in my Hotpoint Ariston LFT 114?
If you notice a white film or limescale deposits on your dishes and glasses after using your Hotpoint Ariston dishwasher, it could be due to: * Low refined salt level or incorrect dosage setting for the water hardness. * Improperly closed lid on the salt dispenser. * Used up or low rinse aid dosage. * The crockery is made from non-stick material.
Why is my crockery not drying properly in my Hotpoint Ariston Dishwasher?
If your crockery isn't drying properly in your Hotpoint Ariston dishwasher, check: * Whether the rinse aid has been used up or the dosage is too low. * If the rinse aid dispenser setting is not high enough. * Whether a wash cycle without a drying programme has been selected.
Why does my Hotpoint Ariston LFT 114 Dishwasher make excessive noise?
Excessive noise from your Hotpoint Ariston dishwasher can be caused by: * Dishes rattling against each other or the sprayer arms. * Too much foam due to incorrect detergent dosage or unsuitable detergent.
What to do if no water enters my Hotpoint Ariston LFT 114 Dishwasher and the shut off tap alarm sounds?
If your Hotpoint Ariston dishwasher isn't getting water and the tap alarm is sounding, consider these possibilities: * There is no water in the mains supply. * The water inlet hose is bent. To resolve this: 1. Turn on the tap; the appliance should start after a few minutes. 2. If beeps activated the appliance lock, switch off the machine using the ON/OFF button, turn on the tap, and switch the machine back on after 20 seconds. Re-programme the machine and restart the wash cycle.
Why do my dishes have streaks after using my Hotpoint Ariston LFT 114?
If your dishes and glasses have streaks or a bluish tinge after washing in your Hotpoint Ariston dishwasher, it's likely that the rinse aid dosage is too high.
What does it mean when the water loading solenoid valve malfunction alarm goes off on my Hotpoint Ariston LFT 114 Dishwasher?
If you're experiencing a water loading solenoid valve malfunction alarm (the 2 (Normal) WASH CYCLE indicator lights flash) on your Hotpoint Ariston dishwasher: Switch off the machine by pressing the ON/OFF button and switch it back on after a minute. If the alarm continues, turn off the water tap to reduce the risk of flooding, remove the plug from the electrical socket and call Assistance.
What should I do if the water inlet hose alarm goes off on my Hotpoint Ariston Dishwasher?
If you encounter a water inlet hose alarm or suspect the water inlet filter is blocked (the 1 (Intensive), the 2 (Normal) and the 3 (Soak) WASH CYCLES indicator lights flash) on your Hotpoint Ariston dishwasher: Switch off the appliance by pressing the ON/OFF button. Shut off the water tap to eliminate the risk of flooding and remove the plug from the electrical socket. Make sure the water inlet filter has not become blocked by various impurities.
Guide to placing and stabilizing the dishwasher.
Instructions for connecting the appliance to water and power sources.
Details on attaching the water inlet hose to the tap.
Information on the appliance's safety system against leaks.
Instructions for connecting the water outlet hose to a drain.
Guidance on loading plates, pans, and large items into the lower rack.
Step-by-step guide to beginning a wash cycle.
Adjusting the softener based on local water hardness.
Instructions for filling the salt dispenser to prevent limescale.
Procedures for safely disconnecting power and water.
Important safety rules for using the appliance.
General| Door color | Not applicable |
|---|---|
| Appliance placement | Fully built-in |
| Control panel color | Stainless steel |
| Connected load | 1750 W |
| AC input voltage | 220 - 230 V |
| AC input frequency | 50 Hz |
| Water consumption per cycle | 12 L |
| Energy consumption per cycle | 1.03 kWh |
| Noise level | 51 dB |
| Number of place settings | 12 place settings |
| Number of washing programs | 4 |
Weight and Dimensions| Depth | 570 mm |
|---|---|
| Width | 595 mm |
| Height | 820 mm |
To Next Page