What to do if my Hotpoint Ariston LSF 723 Dishwasher does not start?
If your Hotpoint Ariston Dishwasher isn't starting, check a few things: First, make sure the plug is correctly inserted into the electrical socket and that there is power in the house. Second, ensure the dishwasher door is properly closed. Finally, check if a delayed start has been programmed; review the start-up and use instructions to adjust this setting.
What to do if Hotpoint Ariston LSF 723 won't drain water?
If water isn't draining from your Hotpoint Ariston Dishwasher, first wait for the cycle to complete. If it still doesn't drain, check and straighten the water inlet hose to ensure it's not bent. Also, clear the drain duct if it's blocked and clean the filter if it's clogged with food residues.
What to do if Hotpoint Ariston LSF 723 doesn't take in water?
If your Hotpoint Ariston Dishwasher isn't taking in water, and the Drying and End indicator lights are flashing (Tap shut-off alarm), first check the water supply to ensure there is water in the mains. Next, check and straighten the water inlet hose to make sure it's not bent. If the indicator lights were flashing and no action was taken, the appliance might be locked; switch off the machine, turn on the tap, and restart it after 20 seconds.
Why is my Hotpoint Ariston LSF 723 not cleaning dishes properly?
If your Hotpoint Ariston Dishwasher isn't cleaning dishes well, several factors could be at play. First, make sure you're not overloading the racks and that the crockery is arranged properly so water can reach all surfaces. Check that the sprayer arms can move freely without obstruction. The selected wash cycle might be too gentle, so try a more intense cycle. Ensure you're using the correct detergent in the proper amount, and verify that the rinse aid compartment lid is correctly shut. Also, a dirty or blocked filter can cause cleaning issues, so clean or replace it. Finally, check and refill the refined salt level if it's low.
How to fix excessive noise in Hotpoint Ariston LSF 723?
Excessive noise in your Hotpoint Ariston Dishwasher can often be resolved by rearranging the dishes to prevent them from rattling against each other or the sprayer arms. It could also be due to using too much detergent or the wrong type, leading to excessive foam. Ensure you use the correct detergent and measure it properly.
Why does my Hotpoint Ariston Dishwasher leave a white film on dishes?
A white film or limescale deposits on dishes and glasses from your Hotpoint Ariston Dishwasher could be due to several reasons. Check the level of the refined salt and adjust the dosage setting to suit the water hardness. Ensure the lid on the salt dispenser is closed properly. Also, check the rinse aid level and adjust the dosage if it's low. Finally, consider that the crockery may be made from non-stick material, and you may need to use suitable crockery.
What causes streaks or bluish tinge on dishes from Hotpoint Ariston LSF 723?
Streaks or a bluish tinge on dishes from your Hotpoint Ariston Dishwasher are likely caused by a rinse aid dosage that is too high. Reduce the rinse aid dosage to resolve this issue.
How to improve drying in my Hotpoint Ariston LSF 723 Dishwasher?
If your crockery isn't drying properly in your Hotpoint Ariston Dishwasher, make sure you've selected a wash cycle with a drying program. Also, check the rinse aid level and adjust the dosage if it's too low. Increasing the rinse aid dispenser setting can also help.
What to do for Water loading solenoid valve malfunction alarm on Hotpoint Ariston LSF 723?
To address a Water loading solenoid valve malfunction alarm (indicated by the Drying indicator light flashing) on your Hotpoint Ariston Dishwasher, switch off the appliance by pressing the ON/OFF button and switch it back on after a minute.
What to do for Water inlet hose alarm on Hotpoint Ariston Dishwasher?
To address a Water inlet hose alarm or blocked water inlet filter (indicated by the Washing, Drying and End indicator lights flashing) on your Hotpoint Ariston Dishwasher, switch off the appliance by pressing the ON/OFF button and shut off the water tap.
Ensures the dishwasher is stable and operates correctly by placing it on a level surface and adjusting feet.
Details on how to safely connect the appliance to water and power sources, emphasizing qualified technician use.
A detailed diagram identifying all external and internal parts of the dishwasher.
Explanation of buttons, knobs, and indicator lights on the dishwasher's control panel.
Explanation of available options like Half Load, Delayed Start, and Multi-functional Tablets.
How to set a delay for the start of a wash cycle.
Guidance on using the half load function to save resources.
Information on using tablets and the specific option to optimize results.
Essential safety warnings and precautions for the correct and safe use of the appliance.
Tips for efficient operation to conserve energy and water, and recommendations for eco-friendly detergents.
Guidance on what to do before contacting technical support and information to have ready.
General| Brand | Hotpoint Ariston |
|---|---|
| Model | LSF 723 |
| Category | Dishwasher |
| Language | English |
To Next Page