D
Donna BlackSep 10, 2025
What to do if Hotpoint Ariston Dishwasher doesn't take in water and shows tap shut-off alarm?
- RRick McphersonSep 10, 2025
If your Hotpoint Ariston Dishwasher doesn't take in water and shows a tap shut-off alarm, the cause may be: * There is no water in the mains supply. * The water inlet hose is bent. Also, turn on the tap and the appliance will start after a few minutes. If the appliance lock has been activated because no action was taken when the beeps sounded, switch off the appliance using the ON/OFF button, turn on the tap and switch the appliance back on after 20 seconds by pressing the same button. Re-program the appliance and restart the wash cycle.












