Ftil-Width
Shelves
(on some models)
Some models have
st=l
wire sliding
shelves, a stationary tempered glass
shelf or two steel wire stationary
shelves. These shelves can be
moved to another place in the fresh
food
comp-ent.
fie
full-width
sliding shelf
has stop-locks.
When placed
correctly on the
shelf supports,
the shelf will
stoD
before
cohng
completely out of the
refrigerator and will not tilt when
you place food on it or remove
food from it.
To remove the fall-width shelves.
Lifi
the rear of the shelf and pull
forward.
To remove a
fd-tidth
sheM
when
the fresh food compartment door
cannot be opened
f@y...
Lift the
rea
of the shelf, pull
forward and down, tilt the shelf
and take it out.
FREEZER
CO~AR=NT
S~LWS
(on some models)
Ice-fray Shelf
(on some models)
To remove the ice-tray shelf:
Lift the left side of the shelf off
Plug
Suppom
its supports, then pull the shelf
to the left to free it of the plug
supports. Pull the shelf to the
right to free the pins from the
holes in the cabinet wall.
*
5
To Next Page
Loading...
