Do you have a question about the Hotpoint Aquarius FDW60 and is the answer not in the manual?
Type | Freestanding |
---|---|
Place Setting Capacity | 12 |
Energy Efficiency Class | A |
Washing Performance Class | A |
Drying Performance Class | A |
Number of Wash Programmes | 6 |
Width | 60 cm |
Water Consumption | 12 L |
Noise Level | 49 dB |
Delay Start | Yes |
Dimensions (H x W x D) | 85 x 60 x 60 cm |
Adjusts the appliance feet to ensure it is horizontal.
Adjusts the appliance height using screws.
Connects cold water supply and drain hoses, sink waste.
Instructions for installing the dishwasher built-in under a worktop.
Adding and using detergent in the dispenser.
Function, filling, and adjusting rinse aid dispenser.
Adjusting salt consumption based on water hardness.
Filling the salt container and when to add salt.
Proper placement of pots, pans, and dishes in the lower rack.
Proper placement of delicate items in the upper rack.
Lists items that should not be washed in the dishwasher.
Identifies buttons and indicator lights on the control panel.
Specifies dimensions, capacity, pressure, and power details.
Turning on, selecting cycles, and starting the dishwasher.
Procedures for changing or pausing the wash cycle.
Setting a delayed start for the wash cycle.
Instructions for washing a reduced load.
Procedures for unplugging, after wash care, seals, and storage.
How to clean the dishwasher's filter assembly.
Maintaining spray arms for optimal performance.
Periodic cleaning of the water inlet filter.
Checks for installation, electrical, or supply faults.
Interpreting flashing lights indicating delayed start.
Causes and resolution for the salt refill light.
Causes and resolution for the rinse aid indicator light.
Addresses issues with the water inlet hose connection.
General information on error codes indicated by flashing lights.
Resolving flashing lights when the water tap is off.
Troubleshooting filter blockages indicated by flashing lights.
Resolving rapid flashing of the 'Fast' cycle light.
Indicates the wash cycle is complete.
Explains the 'Rinse' light illumination during pre-wash.
Addresses residue on dishes after the cycle.
Ensures tablet is not contacting dispenser or baskets.
Checks for blocked spray arm jets and free rotation.
Explains no drying cycle on 'Fast Wash' programme.
Using rinse aid to improve drying performance.
Checks for kinked drain hose or blocked sink trap.
Correct detergent and rinse aid usage to prevent excess foam.
Explains normal stop/start behaviour and potential causes.
Addresses noises from spray arms or inlet valves.
Contact details for repair and service information.
Information on service cover plans for appliances.
Contact details for ordering spare parts and accessories.
Provisions for appliance warranty applicability.
Guidelines for safe disposal of old appliances.