Do you have a question about the Hotpoint FDUD 4212 and is the answer not in the manual?
Type | Freestanding |
---|---|
Delayed Start Timer | Yes |
AquaStop Function | Yes |
Adjustable Feet | Yes |
Upper Basket Adjustable Height | Yes |
Cutlery Compartment Type | Basket |
Drying Performance | A |
Cleaning Performance | A |
Half Load Option | Yes |
Dimensions (H x W x D) | 85 x 60 x 60 cm |
Inlet Hose Length | 155 cm |
Outlet Hose Length | 150 cm |
Delayed Start | 24 hours |
Instructions on how to safely cut and replace the appliance's plug if it does not fit the socket.
Guidance on replacing the mains lead, recommending qualified electrician for safety and compliance.
Ensuring the dishwasher is properly earthed for electrical safety.
Instructions for connecting the dishwasher to cold or hot water supplies, emphasizing qualified technician.
Guidance on connecting the dishwasher's drain hose to the sink waste system, including height requirements.
Description of systems designed to prevent floods by blocking water supply in case of leaks or anomalies.
Explanation of the control panel buttons, indicators, and display functions.
Steps to follow for the initial power-on and setup of the appliance.
Step-by-step guide to selecting a wash cycle, adding detergent, and starting the wash.
Guidance on the correct amount of detergent to use for optimal results and environmental protection.
Instructions on how to fill the rinse aid dispenser for better drying results.
Guide on setting the water softener based on local water hardness levels.
Instructions on how to fill the salt dispenser to prevent limescale.
Procedure for safely shutting off water and electricity before cleaning or maintenance.
Instructions for cleaning the appliance's exterior, interior, and seals.
Important safety precautions for the use and operation of the dishwasher.
Solutions for issues where the dishwasher does not respond or cannot be controlled.
Causes and solutions for the dishwasher not draining water correctly.
Causes and solutions for dishes not being cleaned effectively.
Resolving issues related to the appliance not taking in water, indicated by an alarm.
Troubleshooting water inlet hose alarms or blocked inlet filters.