EasyManua.ls Logo

Hotpoint Style FDYB 10011 - User Manual

Hotpoint Style FDYB 10011
20 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
English, 1
GB
FDYB 11011
Contents
Product Fiche, 2
Precautions and safety advice, 3-4
General safety
Disposal of old electrical appliances
Saving energy and respecting the environment
Recycling & Disposal Information
Installation, 5-6-7
Positioning and levelling
Connecting the electricity and water supplies
Technical data
Advice regarding the first wash cycle
Description of the appliance, 8
Overall view
Control panel
Loading the racks, 9-10
Lower rack
Upper rack
Adjusting the upper rack
Unsuitable crockery
Damage to glass and crockery
Start-up and use, 11
Starting the dishwasher
Measuring out the detergent
Wash cycles, 12
Table of wash cycles
Rinse aid and refined salt, 13
Measuring out the rinse aid
Setting water hardness
Measuring out the refined salt
Care and maintenance, 14
Cutting off the water and electricity supplies
Cleaning the dishwasher
Preventing unpleasant odours
Cleaning the sprayer arms
Cleaning the water inlet filter
Cleaning the filters
Leaving the machine unused for extended periods
Troubleshooting, 15
After-Sales Service, 16
Guarantee, 17
Instructions for use
DISHWASHER
FDYB 10011
STYLE

Table of Contents

Questions and Answers

  • J
    Jennifer RobertsAug 15, 2025
    Why are my dishes not clean after using my Hotpoint Style FDYB 10011 Dishwasher?
    • M
      mcneilrobertAug 16, 2025
      If your dishes aren't coming out clean from your Hotpoint dishwasher, it could be due to several reasons. Check if the racks are overloaded or if the crockery isn't arranged well, as this can prevent proper cleaning. Ensure the sprayer arms can move freely. The selected wash cycle might be too gentle for the load. Excessive foam from using the wrong detergent or incorrect measurement can also leave residue. Make sure the lid on the rinse aid compartment is correctly shut and that the filter isn't dirty or blocked. Finally, verify that the refined salt level isn't low.
  • R
    Rebecca BentonAug 18, 2025
    What to do if my Hotpoint Dishwasher does not start?
    • J
      Joseph ClarkAug 19, 2025
      If your Hotpoint dishwasher won't start or respond to controls, try these steps: First, turn the dishwasher off and on using the ON/OFF button, waiting about a minute before turning it back on to reset the program. Ensure the appliance is properly plugged into the power outlet. Also, double-check that the dishwasher door is fully closed.
  • M
    martindeniseAug 22, 2025
    Why no water drains out from my Hotpoint Style FDYB 10011 Dishwasher?
    • C
      Christina GreenAug 22, 2025
      If water isn't draining from your Hotpoint dishwasher, consider these possibilities: The wash cycle might still be in progress. Inspect the water inlet hose for any bends that could be restricting water flow. Check the drain duct for blockages. Also, examine the filter to ensure it's not clogged with food residues.
  • J
    Jeremy GarrettAug 25, 2025
    Why is my Hotpoint Dishwasher beeping and not taking in water?
    • S
      Sherri WadeAug 26, 2025
      If your Hotpoint dishwasher is beeping and the Drying and End lights are flashing, indicating a water supply issue, try the following: Ensure that there is water in the mains supply. Check the water inlet hose for any bends. Turn on the tap to allow the appliance to start after a few minutes. If the appliance lock has been activated, switch off the appliance using the ON/OFF button, turn on the tap, and switch the appliance back on after 20 seconds. Then, reprogram and restart the wash cycle.
  • T
    Tonya DavisAug 27, 2025
    Why is my Hotpoint Style FDYB 10011 not drying properly?
    • J
      jfloresAug 28, 2025
      If your crockery isn't drying properly in your Hotpoint dishwasher, several factors could be at play. Ensure that you've selected a wash cycle that includes a drying program. Check the rinse aid level and dosage. Also, verify that the rinse aid dispenser setting is appropriate. Keep in mind that crockery made from non-stick material or plastic may not dry as effectively.
  • B
    Brenda RoseAug 30, 2025
    How to remove white film from dishes in Hotpoint Style FDYB 10011 Dishwasher?
    • A
      Alison AndersonAug 30, 2025
      If you notice a white film or limescale deposits on your dishes and glasses after using your Hotpoint dishwasher, it could be due to a few reasons. Check the level of refined salt and ensure the dosage setting is appropriate for your water hardness. Verify that the lid on the salt dispenser is properly closed. Also, make sure you haven't run out of rinse aid or that the dosage isn't too low.
  • K
    Kevin LopezSep 2, 2025
    Why are my dishes streaked after using my Hotpoint Style FDYB 10011?
    • D
      Daniel ArnoldSep 2, 2025
      If your dishes and glasses are coming out of your Hotpoint dishwasher with streaks or a bluish tinge, it's likely that the rinse aid dosage is too high. Try reducing the amount of rinse aid you're using.
  • A
    Alejandro BerrySep 5, 2025
    Why does my Hotpoint Style FDYB 10011 make excessive noise?
    • E
      Edward DawsonSep 6, 2025
      Excessive noise from your Hotpoint dishwasher can stem from a couple of sources. Check if the dishes are rattling against each other or the sprayer arms. It could also be due to excessive foam from using too much detergent or an unsuitable type; make sure your detergent is designed for dishwashers and that you're using the correct amount.
  • W
    whinesSep 8, 2025
    What to do for Water inlet hose alarm on Hotpoint Style FDYB 10011?
    • P
      Patricia GonzalesSep 9, 2025
      If the Washing, Drying, and End indicator lights are flashing on your Hotpoint dishwasher, indicating a water inlet issue, follow these steps: Turn off the appliance using the ON/OFF button. Shut off the water tap and unplug the dishwasher to prevent flooding. Inspect the water inlet filter for blockages from impurities.
  • D
    Deborah PorterSep 12, 2025
    What to do if the door of my Hotpoint Dishwasher won’t close?
    • C
      Cheryl LunaSep 12, 2025
      If the door of your Hotpoint dishwasher won’t close, it is possible that the lock was released. Push the door firmly until you hear a “clacking” noise.

Summary

Precautions and Safety Advice

General Safety Precautions

Provides essential safety guidelines for operating the appliance safely and preventing accidents.

Installation

Positioning and Levelling

Steps for correctly positioning and levelling the dishwasher for stable operation.

Electrical Connection

Guidelines for safely connecting the dishwasher to the electrical supply.

Connecting Water Inlet Hose

Sink Waste System

Loading the Racks

Lower Rack Loading

Guidance on arranging dishes, pans, and lids in the lower rack.

Cutlery Basket Loading

Instructions for loading cutlery and utensils in the basket.

Upper Rack Loading

Advice on loading delicate items like glasses, cups, and saucers in the upper rack.

Start-up and Use

Starting the Dishwasher

Step-by-step guide to initiating the dishwasher operation.

Measuring Detergent

Guidance on correctly measuring detergent for optimal wash results and environmental care.

Changing a Wash Cycle

Adding Extra Crockery

Accidental Interruptions

Wash Cycles

Wash Cycle Selection and Detergent Dosage

Instructions for selecting appropriate wash cycles and recommended detergent quantities.

Rinse Aid and Refined Salt

Measuring Rinse Aid

Guide on filling and adjusting the rinse aid dispenser for optimal drying.

Rinse-Aid Dispenser Setting

Setting Water Hardness

How to set the water hardness level for the appliance's water softener.

Measuring Refined Salt

Procedure for filling the salt dispenser to prevent limescale buildup.

Care and Maintenance

Shutting Off Water and Electricity Supplies

Cleaning the Dishwasher

Cleaning the Sprayer Arms

Cleaning the Water Inlet Filter

Cleaning the Filters

Troubleshooting

Dishwasher Not Starting

Solutions for issues where the dishwasher fails to start or respond to controls.

Door Wont Close

No Water Drains Out

Causes and solutions for water not draining from the dishwasher.

Excessive Noise

White Film or Limescale Deposits

Streaked or Bluish Tinge

Improper Drying

Dishes Not Clean

Solutions for common problems resulting in unclean dishes.

Water Inlet Alarm; Hose Issues

Resolving issues related to water intake, tap shut-off, or blocked inlet filters.

Guarantee

12 Months Parts and Labour Guarantee

5 Year Parts Guarantee

Hotpoint Style FDYB 10011 Specifications

General IconGeneral
Appliance placementFreestanding
Control panel colourWhite
Number of washing programs6
Energy efficiency classA
Drying PerformanceA
Cleaning PerformanceA
Delay StartYes
Product sizeFull-size
Number of place settings10
Washing programsEco, Intensive, Normal, Soak
Width600 mm
Depth600 mm
Height850 mm

Related product manuals