Hotpoint FFU00 - Fridge Compartment Door Removal; Door Replacement

Remove the Fridge Compartment Door:
* Loosen the upper hinge cover screws and
remove the cover (Fig.5).
* Remove the retainer by rotating it
clockwise (b - Fig.6), then remove the
upper hinge by lifting up.
* Remove the fridge compartment door by
lifting it up, off the lower hinge (Fig.7).
Pass the appliance through the access door,
in its upright position (Fig.8)
Door Replacement:
* Replace both doors by following the
removal instruction in reverse order.
Installation
NOTE: Support the door when removing
the upper hinge.
NOTE: Carry the fridge compartment door
through the access door and lay it down
on suitable material eg. the original
packaging.
7
Fig.5
Fig.6
Fig.7
Fig.8