Hotpoint HCM15 - Page 17

GB
17
AROMA LONG COFFEE
This function allows you to program a dosage
(quantity) setting for coffee beans to be ground for
long coffee (strong, medium, mild).
Use the key to select the function:
AROMA LARGE COFFEE *
PREBREWING
Enable it with the key.
The display shows (e.g.):
AROMA LARGE COFFEE
STRONG
Select the required dose by pressing the key
and use the key to save your choice.
PRE-BREWING
The pre-brewing process enhances the aroma of
coffee to give it an excellent taste. This function
moistens the coffee before it is actually brewed.
Use the key to select the function:
PREBREWING *
TOTAL COFFEES
Enable it with the key.
The display shows (e.g.):
PREBREWING
ON
Use the key to choose whether to disable the
function:
PREBREWING
OFF
or to extend the phase:
PREBREWING
LONG
to enhance the flavour of your coffee.
Save your choice using the key.
TOTAL COFFEES
This function displays the number of coffees already
dispensed by the appliance.
Use the key to select the function:
TOTAL COFFEE *
TIMER
Enable it with the key.
The display shows (e.g.):
TOTAL COFFEE
81
Press key to exit.
TIMER
This function enables you to save energy when the
machine is not used for long periods.
This function is preset by the manufacturer and is
automatically enabled.
ENERGY SAVING
after 3 hours from the use.
! Switch-off time can be regulated at 15-minute
intervals with a minimum of 15 minutes. The function
cannot be disabled.
Use the key to select the function:
TIMER *
CLOCK
Enable it with the key.
The display shows:
STANDBY
AFTER 3:00
Select the automatic switch-off interval by pressing the
key and use the key to save.
! Note: if automatic switch-on/off times are enabled in
“CLOCK” mode, this function will be ignored.