EasyManua.ls Logo

Hotpoint HHP7.5CM - PYRAMID Controls

Hotpoint HHP7.5CM
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
GB
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
PYRAMID controls
T1 T2 T3 T4 T5
T1 Motor reset
Pressing the button while the hood is in operation turns it
OFF.
T2 Speed 1
Pressing the button sets the hood to speed 1.
T3 Speed 2
Pressing the button sets the hood to speed 2.
T4 Speed 3
Pressing the button sets the hood to speed 3.
T5 Lights ON/OFF
Models with soft button keypad
T1 T2 T3 T4 T5
B
T6
T1 Motor reset
T2 Speed 1
Pressing the button sets the hood to speed 1.
T3 Speed 2
Pressing the button sets the hood to speed 2.
T4 Speed 3
Pressing the button sets the hood to speed 3.
T5 Booster
Pressing the button sets the hood to high speed. After 5
minutes, the hood returns to the previous speed; pressing
a speed button (T2, T3 or T4) quits booster mode and sets
the selected speed.
T6 Lights ON/OFF
Grease/odour lter warnings
The T2 icon ashes to indicate that the grease lter is
saturated, while T3ashestoindicatethattheodourlter
issaturated,andifbothareashingthenbothltersare
saturated.Youmustthenclean/replacethegreaselter(A)
orodourlter(B)orboth,accordingly(see“Maintenance
andcare”).
To reset the lter counter:
Hold down T5 for three seconds while the hood is on.
The warning led ashes three times, then returns to its
normalmodeIfbothlterwarningsareactiveatthesame
time, you must reset each separately.
Therstsequenceresetsthegreaselter,whilethesecond
sequenceresetstheodourlter.
Hood confi guration:
To set the operating mode of the hood, hold down T5 for 6
seconds while the product is off. Icons T2 or T3 will light up
to show the type of installation: T2 ventilation, T3 fi ltering.
You can change the type of installation by pressing T4
cyclically.
To save the new confi guration press T1 individually.
Press the button with the hood off to set speed 1. Pressing
thebuttonwhilethehoodisinoperationturnsitOFF.
HHP7.5SCBI
HHP6.5SCBI
Models with mechanical keypad
HHP7.5CM
HHP6.5CM
HHP9.5CM
HHP6.5CM(WH)
HHP6.5CM(BK)