To Next PageTo Next PageWhat to do if my Hotpoint Dishwasher does not start or cannot be controlled?
If your Hotpoint dishwasher won't start or you can't control it, try the following: first, switch the appliance off using the ON/OFF button, wait about a minute, and then switch it back on and reset the program. Ensure that the appliance is properly plugged in. Also, check that the dishwasher door is completely shut.
What to do if my Hotpoint LTB 4B019 won't drain water?
If no water drains from your Hotpoint dishwasher, consider the following: * Ensure the wash cycle has completed. * Check the water drain hose for bends (see Installation). * Inspect the drain duct for clogs. * Clean the filter if it's clogged with food residues. * Verify the height of the drain hose.
How to fix a Hotpoint LTB 4B019 Dishwasher that's not cleaning dishes properly?
If your dishes aren't clean after a cycle in your Hotpoint dishwasher, consider these points: * Ensure the crockery is arranged properly, allowing the spray arms to rotate freely. * Select a more intense wash cycle. * Use the correct amount and type of detergent. * Check that the rinse aid compartment lid is correctly closed and that the refined salt level is adequate. * Clean the filter and spray arm holes if they are dirty or clogged. * Ensure the height of the dishes is compatible with the rack adjustment.
How to fix the problem when Hotpoint Dishwasher doesn't clean dishes properly?
If your Hotpoint dishwasher is not cleaning dishes properly, it could be due to several reasons. Ensure that the crockery has been arranged properly and that the spray arms can rotate freely. Check if the wash cycle is too gentle. Make sure that the detergent has been measured out correctly and is suitable for use in dishwashers. Ensure that the lid on the rinse aid compartment has been closed correctly. Also, the filter may be dirty or clogged up, or the refined salt level may be low. Check that the height of the dishes is compatible with the rack adjustment and that the holes in the spray arms are not clogged.
What to do if no water drain out of the Hotpoint LTB 4B019 Dishwasher?
If your Hotpoint dishwasher is not draining water, it could be due to several reasons. First, ensure that the wash cycle has finished. Check if the water drain hose is bent. Also, the drain duct or the filter might be clogged up with food residues. Finally, check the height of the drain hose.
Why my Hotpoint LTB 4B019 does not start?
If your Hotpoint dishwasher does not start or cannot be controlled, there are several possible reasons. First, ensure that the water supply tap is turned on. Then, switch off the appliance by pressing the ON/OFF button, wait approximately one minute, and switch it back on to reset the wash cycle. Also, make sure the appliance is properly plugged in or try another electricity socket. Finally, ensure that the dishwasher door is fully closed.
Why is crockery not drying properly in my Hotpoint LTB 4B019 Dishwasher?
If your crockery isn't drying properly in your Hotpoint dishwasher, it could be because you've selected a wash cycle without a drying cycle. Also, check if the rinse aid has been used up or if the dosage is too low, or if the rinse aid setting is not suitable. Note that crockery made from non-stick material or plastic may not dry as effectively.
What to do if my Hotpoint LTB 4B019 Dishwasher does not take any water in?
If your Hotpoint dishwasher isn't taking in water, it could be due to several reasons. Check that there is water in the mains supply and that the water inlet hose isn't bent. Try turning on the tap; the appliance should start after a few minutes. If the appliance lock has been activated because no action was taken when the beeps sounded, switch off the machine using the ON/OFF button, turn on the tap, and switch the machine back on after a few seconds. Then, re-program the appliance and restart the wash cycle.
What to do if no water drains from my Hotpoint Dishwasher?
If water isn't draining from your Hotpoint dishwasher, consider these possibilities: the dishwasher cycle may not have finished yet. Check the water drain hose to ensure it isn't bent. Make sure the drain duct isn't blocked, and inspect the filter for any food residues that may be clogging it.
Why is my Hotpoint LTB 4B019 crockery not clean?
If your crockery isn't coming out clean from your Hotpoint dishwasher, several factors could be at play. Make sure that you are not overloading the racks and that the crockery is arranged properly, allowing the sprayer arms to move freely. Check that you've selected an appropriate wash cycle. Ensure that you're using the correct amount of detergent and that the lid on the rinse aid compartment is correctly shut. Also, verify that the filter isn't dirty or blocked and that the refined salt level is adequate. If problems persist, switch off the appliance, turn off the water tap, unplug the appliance and make sure the water inlet filter has not become blocked by impurities.
General| Type | Freestanding |
|---|---|
| Number of Place Settings | 13 |
| Noise Level | 49 dB |
| Dimensions (H x W x D) | 85 x 60 x 60 cm |
| Control Panel Colour | Black |
| Number of Washing Programs | 4 |
| Drying System | Static |
| Delayed Start Timer | Yes |
| Child Lock | No |
| Washing Programs | Eco, Intensive, Normal |
| Cycle Time | 190 minutes |
| Delay Start (max) | 24 hours |
Important safety information for using the appliance safely, covering user responsibilities and prohibitions.
Instructions for correctly positioning and levelling the dishwasher on a stable floor for optimal operation.
Steps and precautions for connecting the water inlet hose to the water supply.
Guidance on connecting the drain hose to a drain duct, ensuring proper height and avoiding blockages.
Description of the appliance's special system and supplementary devices to prevent floods.
Guidance on correctly measuring detergent for optimal wash results and environmental protection.
Step-by-step instructions on how to start a wash cycle, including pre-checks and post-cycle actions.
Guidance on selecting wash cycles, understanding their data, and proper detergent dosage.
Procedures for safely turning off water and electricity before cleaning or maintenance.
Detailed guide on how to remove, clean, and reassemble the filter assembly for optimal performance.
Solutions for issues where the appliance fails to start or respond to controls.
Troubleshooting steps for when the dishwasher door does not latch securely.
Causes and solutions for the dishwasher not draining water after a cycle.
