EasyManua.ls Logo

Hotpoint LTF 11M113 7C - User Manual

Hotpoint LTF 11M113 7C
20 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
English, 1
GB
LTF 11M113 7C
Contents
Product Fiche, 2
Precautions and safety advice, 3-4
General safety
Disposal of old electrical appliances
Saving energy and respecting the environment
Recycling & Disposal Information
Installation, 5-6-7
Positioning and levelling
Connecting the electricity and water supplies
Technical data
Switching the appliance on for the first time
Advice regarding the first wash cycle
Transportation
Description of the appliance, 8
Overall view
Control panel
Loading the racks, 9-10
Lower rack
Upper rack
Cutlery basket
Adjusting the upper rack
Cutlery tray*
Unsuitable crockery
Damage to glass and crockery
Start-up and use, 11
Starting the dishwasher
Measuring out the detergent
Wash cycles, 12
Table of wash cycles
Special wash cycles and options, 13
Rinse aid and refined salt, 14
Measuring out the rinse aid
Measuring out the refined salt
Care and maintenance, 15
Cutting off the water and electricity supplies
Cleaning the dishwasher
Preventing unpleasant odours
Cleaning the sprayer arms
Cleaning the water inlet filter
Cleaning the filters
Leaving the machine unused for extended periods
Troubleshooting, 16
After-Sales Service, 17
Guarantee, 18
Instructions for use
DISHWASHER

Table of Contents

Questions and Answers

  • D
    Dr. Jennifer Holmes MDAug 14, 2025
    Why are my dishes not clean in my Hotpoint LTF 11M113 7C?
    • H
      hnelsonAug 14, 2025
      If your dishes aren't coming out clean from your Hotpoint dishwasher, several factors could be at play. Ensure that you are not overloading the racks and that the crockery is arranged properly, following guidelines for loading the racks. Check that the sprayer arms can move freely. Verify that you've selected an appropriate wash cycle. Also, excessive foam from using too much or unsuitable detergent can leave residue. Make sure the lid on the rinse aid compartment is correctly shut and that the filter isn't dirty or blocked. Finally, ensure the refined salt level is adequate.
  • J
    Joel HernandezAug 17, 2025
    What to do if my Hotpoint dishwasher does not start?
    • L
      Lynn TateAug 17, 2025
      If your Hotpoint dishwasher isn't starting, try these steps: First, turn the dishwasher off and then on again after about a minute, and reset the program. Ensure the appliance is properly plugged in. Also, make sure the dishwasher door is fully closed.
  • S
    Sydney JonesAug 20, 2025
    What to do if my Hotpoint LTF 11M113 7C won't drain water?
    • R
      Ricardo ShepardAug 20, 2025
      If water isn't draining from your Hotpoint dishwasher, make sure the cycle has finished. Check the water inlet hose for any bends and refer to the installation instructions if needed. Also, inspect the drain duct for blockages and ensure the filter isn't clogged with food residues.
  • S
    Sheena SandersAug 25, 2025
    What to do if my Hotpoint LTF 11M113 7C Dishwasher won't take in water?
    • K
      Kimberly CamposAug 25, 2025
      If your Hotpoint dishwasher isn't taking in water and you hear beeps with an 'H' on the display, or the ON/OFF light flashes with a '6' on the display, check that there's water in the mains supply. Also, inspect the water inlet hose for bends, referring to the installation instructions if needed. Turn on the tap; the appliance should start in a few minutes. If the appliance lock activated due to inaction, switch off the machine, turn on the tap, and switch the machine back on. Then, reprogram and restart the wash cycle.
  • H
    Holly LucasAug 27, 2025
    Why aren't my dishes drying properly in my Hotpoint LTF 11M113 7C?
    • M
      megannguyenAug 27, 2025
      If your crockery isn't drying well in your Hotpoint dishwasher, it could be because you selected a wash cycle without a drying program. Also, check if the rinse aid has been used up or the dosage is too low, or if the rinse aid dispenser setting isn't high enough. Keep in mind that non-stick or plastic crockery may not dry as effectively.
  • D
    daviddavisAug 30, 2025
    Why do my dishes have white film on them after washing in my Hotpoint dishwasher?
    • R
      Robert GoodmanAug 30, 2025
      A white film or limescale on dishes and glasses from your Hotpoint dishwasher may be due to a low level of refined salt, or the dosage setting isn't right for your water hardness. Also, check that the salt dispenser lid is properly closed, and ensure you have enough rinse aid with the correct dosage.
  • J
    Jason CaldwellSep 3, 2025
    Why are my dishes streaked after using my Hotpoint LTF 11M113 7C Dishwasher?
    • G
      gbestSep 3, 2025
      Streaked or bluish-tinged dishes from your Hotpoint dishwasher could mean the rinse aid dosage is too high.
  • C
    Christopher ChambersSep 6, 2025
    Why is my Hotpoint LTF 11M113 7C Dishwasher so noisy?
    • R
      Ryan MartinezSep 6, 2025
      Excessive noise from your Hotpoint dishwasher can be due to dishes rattling against each other or the sprayer arms. Another cause could be too much foam, which happens if the detergent wasn't measured correctly or isn't suitable for dishwashers.
  • D
    dennis36Sep 9, 2025
    What to do if the door won’t close on my Hotpoint dishwasher?
    • M
      Michele WillisSep 9, 2025
      If the door of your Hotpoint dishwasher won’t close, it may be because the lock was released. Try pushing the door firmly until you hear a 'clacking' noise.

Summary

Product Fiche

Precautions and Safety Advice

General Safety Guidelines

General safety guidelines for using the appliance safely.

Disposal of Old Appliances

Guidance on how to safely dispose of old electrical appliances.

Energy and Environmental Savings

Tips for saving energy and water, and respecting the environment.

Recycling and Disposal Information

Information on recycling packaging and old appliances.

Installation

Positioning and Levelling

Instructions on how to correctly position and level the appliance.

Electrical Connection

Guidance on making the correct electrical connections for the appliance.

Plug and Cable Management

Safety instructions for the power plug and cable, including replacement.

Technical Data

Technical specifications and data for the dishwasher.

Water Supply Connection

Details on connecting the water inlet and outlet hoses.

Sink Waste System Connection

Instructions for connecting the drain hose to the sink waste system.

First Time Appliance Start-up

First Wash Cycle Advice

Recommendations for the very first wash cycle after installation.

Appliance Transportation

Long Term Storage and Freezing Protection

Appliance Description

Overall View

A diagram showing the main parts of the dishwasher.

Control Panel Overview

Explanation of the buttons, lights, and display on the control panel.

Loading the Racks

General Loading Tips

General advice for loading crockery efficiently and safely.

Lower Rack Loading

How to load items into the lower rack for optimal washing.

Cutlery Basket Loading

Guidance on placing cutlery correctly in the basket.

Upper Rack Loading

How to load delicate items into the upper rack.

Adjustable Rack Features

How to adjust rack features for optimal loading.

Cutlery Tray and Unsuitable Items

Information on the cutlery tray and types of items not to wash.

Preventing Crockery Damage

Causes and tips to prevent damage to glassware and crockery.

Start-up and Use

Starting the Dishwasher

Step-by-step instructions to start a wash cycle.

Measuring Detergent

Guidance on how to correctly measure and add detergent.

Cycle Modification and Interruptions

How to modify, add to, or recover from interruptions during a wash cycle.

Wash Cycles

Special Wash Cycles and Options

Wash Options Overview

Explanation of various wash cycle options available.

Delayed Start Function

How to set a delayed start for wash cycles.

Short Time and Zone Wash Options

Using options to reduce cycle time or target specific racks.

Extra Drying Option

How to activate the Extra Drying option for improved dryness.

Rinse Aid and Refined Salt

Rinse Aid Management

How to fill, adjust, and manage the rinse aid dispenser.

Water Hardness Setting

How to set the water hardness for optimal performance.

Refined Salt Management

Instructions for filling the salt dispenser to prevent limescale.

Care and Maintenance

Safety and Preparation for Maintenance

How to safely prepare the appliance for maintenance or long-term storage.

General Cleaning Procedures

Routine cleaning of the appliance's exterior, interior, seals, and spray arms.

Filter Maintenance

Instructions for cleaning the appliance's various filters to ensure optimal performance.

Troubleshooting

After Sales Service

Essential Contact Information

Key contact numbers and website for Hotpoint service.

Appliance Registration and Parts

Information on registering the appliance and obtaining spare parts.

Recycling and Disposal Advice

Information on recycling packaging and old appliances.

Guarantee Information

Standard 12-Month Guarantee

Details of the manufacturer's 12-month parts and labour guarantee.

Extended Guarantee Options

Information on additional guarantees and protection plans.

Free Helpdesk Service

Information about free helpdesk assistance for technical difficulties.

Hotpoint LTF 11M113 7C Specifications

General IconGeneral
TypeFreestanding
Appliance placementFreestanding
Energy Efficiency ClassA++
Noise Level47 dB
Number of Programs7
Number of washing programs7
Drying systemStatic
Water consumption per cycle11 L
Drying Efficiency ClassA
Delay StartYes
Half Load OptionYes
Height850 mm
Width600 mm
Depth570 mm
Washing programsEco, Intensive, Normal
Annual water consumption3080 L

Related product manuals