Hotpoint RZA34 User Manual

FREEZER - MODELS RZA34,RZA36,RZM34,RZM36
INSTRUCTIONS FOR INSTALLATION & USE
GETTING STARTED:
To ensure that your freezer runs reliably and efficiently follow these steps.
Choose a location for your
freezer, away from any
heat sources and
allow adequate
ventilation - 30mm
(1
1
/4 inch) gap above.
Level the freezer by
adjusting the front feet.
This will stop rocking or
vibration and keep the
door aligned.
Plug in and switch on.
Allow the freezer to cool
before placing food
inside.
The high temperature
light will stay on until the
freezer has cooled down.
All food in the freezer
should be covered.
Move the freezer into
position, using the sides
of the cabinet. Take care
to avoid damaging the
refrigerant circuit pipe
work on the rear.
Before plugging in and
switching on, leave the
freezer in its final
location for at least 15
minutes to allow it to
settle.
If you are freezing fresh
food, turn on fast freeze
by pressing the switch 24
hours before placing the
food inside. Place the
fresh food inside and
remember to turn off fast
freeze after another 24
hours.
Read the rest of these instructions to get the best from your appliance
and remember to fill in your guarantee registration.
Keep this Book in a safe place for quick reference.
STEP 1
STEP 2
STEP 3 STEP 4
STEP 5 STEP 6
SAFETY &
INSTALLATION CONTROLS USEFUL ADVICE
CLEANING &
MAINTENANCE
TROUBLESHOOTING
SERVICE &
GUARANTEE
Your freezer is now
working.
If after 24 hours your
freezer is not operating as
you want, refer to the
TROUBLESHOOTING
section.
STEP 7

Hotpoint RZA34 Specifications

General

Appliance placement	Freestanding
Energy Rating	A+
Frost Free	Yes
Climate class	SN-T
Door hinge	Right
Type	Upright
Width	600 mm
Depth	650 mm
Star rating	4 stars

Summary

Getting Started

Choose Location and Ventilation

Select a location away from heat sources with 30mm ventilation gap.

Position and Level Freezer

Move freezer carefully and level using front feet to prevent vibration and ensure door alignment.

Settling and Power On

Allow freezer to settle for 15 mins before plugging in and switching on.

Fast Freeze Operation

For Your Safety

General Safety Precautions

Avoid risks with flammable gas, ensure ventilation, no electrical defrosting devices.

Installation Safety

Ensure mains cable is not trapped and do not stack appliances on top.

Usage Safety

Installation - Location and Air Circulation

Location Requirements

Door Opening Space

Installation - Levelling and Worktop Fitting

Levelling the Freezer

Fitting Under a Work Top

Installation - Electrical Supply and Fuses

Electrical Requirements

Appliance must be earthed; plug must be accessible.

Controls - Temperature Management

Adjusting Freezer Temperature

Controls - Indicator Lights

Light Indicators Explained

Controls - Fast Freeze Feature

Using Fast Freeze for Fresh Food

Guide on pre-freezing and loading fresh food with fast freeze.

Fast Freeze Chart

Useful Advice - General Usage Tips

Making the Best Use of Your Freezer

Useful Advice - Storing Food

Storing Food in the Freezer

Defrosting Instructions

Fully Defrosting Your Freezer

Step-by-step guide for complete freezer defrosting.

Cleaning Procedures

Interior Cleaning

Instructions for cleaning freezer interior using recommended solutions.

Exterior Cleaning

How to clean exterior surfaces safely, avoiding abrasives.

Maintenance - Door Reversal

Reversing Freezer Door Hinges

Detailed procedure for changing the door opening direction.

Troubleshooting Common Issues

Appliance Not Working or Noisy

Temperature and Warning Light Issues

Door and Ice Build-up Problems