Hotpoint TCFS 835B User Manual

1
GB
English
GB
TUMBLE DRYER
TCFS 83B
TCFS 835B
Instruction booklet
This symbol reminds you to read this in-
struction manual.
! Keep this manual at hand for immediate reference whenever
necessary. Always store this manual close to the tumble dryer and
remember to pass it on to any new owners when selling or tran-
sferring the appliance, so they may familiarise with the warnings
and suggestions herein contained.
! Read these instructions carefully: the following pages contain
important information on installation and useful suggestions for
operating the appliance.
Contents
Installation, 2
Warnings, 4
Care and Maintenance, 6
Control panel and Care Label, 8
Start and Programmes, 9
Options, 10
Troubleshooting, 11
Assistance and Information of recycling, 12
www.hotpoint.eu

Hotpoint TCFS 835B Specifications

General

Appliance placement	Freestanding
Loading type	Front load
Drying system	Condenser
Rated capacity	8 kg
Drying class	B
Noise level	69 dB
Energy efficiency class	B
Width	595 mm
Height	850 mm
Remaining time indication	Yes
Delayed start	Yes
Number of Programs	16
Color	White
Drying programs	Synthetics, Wool
Control type	Buttons, Rotary

Summary

Installation

Where to install the tumble dryer

Specifies location requirements, clearances, and air circulation for proper installation.

Ventilation

Water drain

Electrical connections

Covers essential electrical safety checks, socket requirements, and cable handling.

Warnings

General safety

Provides essential safety guidelines for operating the appliance, including child safety.

To minimise the risk of fire

Details specific precautions to prevent fire hazards when using the dryer.

Care and maintenance

Cleaning the filter after each cycle

Guidance on cleaning the lint filter to maintain airflow and dryer efficiency.

Emptying the water container after each cycle

Cleaning the condenser unit

Start and Programmes

Starting and selecting a programme

Step-by-step guide to plugging in, loading, and starting a drying cycle.

Troubleshooting

The dryer does not start

Checks for common issues when the dryer fails to start.

The drying cycle does not start

Troubleshooting steps for when the selected drying cycle doesn't begin.

Drying times are too long

Identifies reasons for extended drying times, such as filter or condenser issues.

The "Empty water container" indicator light flashes

The programme is finished but the items are damper than expected

The "Options" and "START/PAUSE" indicator lights flash and one of the "Maintenance" or "Drying phases" indicator lights turns on without flashing

Troubleshooting steps for specific flashing indicator light combinations.

Assistance

Before contacting the Technical Assistance Centre

Guidance on troubleshooting steps before calling for support.

Provide the following data when contacting the Technical Assistance Centre