To Next PageTo Next PageWhy won't my Hotpoint TVF760 start?
If your Hotpoint Dryer won't start, try these steps: First, test the socket by plugging in another appliance. Then, plug the dryer's power cord directly into the socket. Also, ensure the door is securely closed, the PROGRAMMES knob is properly set, and the START/PAUSE button has been pressed.
Why is my Hotpoint Dryer taking so long to dry?
If your Hotpoint Dryer is taking a long time to dry, several factors could be the cause: * The filter may need cleaning. * The selected programme may not be appropriate for the load. * The flexible vent tube, air intake vent, or ventilation flap on the storm cover might be obstructed. * The items might have been too wet or the dryer might have been overloaded.
How to turn off demo mode on Hotpoint TVF760?
If your Hotpoint Dryer display briefly shows it's in 'Demo' mode, press and hold both the On/Off and Start/Pause buttons for 3 seconds to exit this mode.
Instructions on cleaning the fluff filter after every drying cycle.
Guidelines for dryer placement to ensure proper air circulation and safety.
Information on dryer ventilation requirements and vent tube installation.
Requirements for safe electrical connection of the dryer.
Instructions on how to ensure the dryer is level for correct operation.
Explanation of the dryer's control panel buttons, lights, and display.
Step-by-step guide on selecting a drying programme.
Overview of available drying programmes and their functions.
List of materials and items that should not be tumble dried.
Essential safety precautions for using the tumble dryer.
Instructions for cleaning the fluff filter after every drying cycle.
General