Do you have a question about the Hotpoint WMD 9692 P and is the answer not in the manual?
Load Capacity | 9 kg |
---|---|
Spin Speed | 1600 rpm |
Energy Rating | A+++ |
Wash Programs | 16 |
Dimensions (H x W x D) | 85 cm x 59.5 cm x 60.5 cm |
Type | Freestanding |
Loading type | Front Loading |
Noise Level (Washing) | 53 dB(A) |
Details on how to unpack the appliance and ensure it is level for proper operation.
Instructions for connecting the water inlet hose and electrical supply.
Guidance on how to connect the drain hose to a drain outlet or sink trap.
Ensuring the appliance is correctly and safely connected to the mains electricity supply.
Instructions for running the initial wash cycle with detergent before first use.
Overview of the washing machine's control panel buttons and their functions.
Explanation of the washing machine's display elements and indicators.
Adjusting temperature, spin speed, and setting a delayed start for the wash cycle.
Details of available wash cycles, including temperature, spin speed, and load capacity.
Explanation of special functions like Super Wash, Reduced Creases, Mini Load, Timer Saver, and Eco Wash.
Instructions on how to use the detergent dispenser drawer correctly.
Guidance on sorting, loading, and weighing laundry for optimal washing.
Information on specific wash cycles like Fastwash, Silk, Curtains, and Wool.
Explanation of how the machine balances the load for spin cycles.
Important safety instructions for the domestic use of the washing machine.
Guidelines for the safe and environmentally friendly disposal of the appliance.
Procedure for manually opening the washing machine door in case of power failure.
Steps to safely disconnect the appliance from water and power before maintenance.
Instructions for cleaning the exterior and rubber components of the appliance.
Guide on how to remove and clean the detergent dispenser drawer.
Tips for maintaining the door and drum to prevent odours and damage.
Procedure for accessing and cleaning the pump pre-chamber for maintenance.
Advice on regularly checking the water inlet hose for cracks and leaks.
Troubleshooting steps for when the washing machine fails to power on.
Solutions for issues preventing the wash cycle from beginning.
Diagnosing and resolving problems related to the machine not filling with water.
Addressing issues where the machine fills and drains simultaneously or gets stuck.
Troubleshooting drainage and spin cycle failures, including error codes.
Resolving issues related to the machine not heating water or poor washing performance.
Understanding and resolving issues with extended programme times.
Diagnosing and fixing excessive vibration during the spin cycle.
Identifying causes and solutions for unusual noises during operation.
Troubleshooting the machine's inability to spin effectively or at the correct speed.
Resolving leaks originating from the detergent dispenser drawer.
Troubleshooting leaks occurring elsewhere on the appliance.
Diagnosing issues indicated by rapidly flashing console lights.
Solutions for unpleasant odours emanating from the washing machine.
Troubleshooting why the washing machine door remains locked after a cycle.
Note on the door seal having drainage holes, which is normal.
Checking the water level during a wash cycle and ensuring it is correct.
Resolving issues related to excessive foam formation during the wash cycle.
Addressing the machine turning off automatically due to standby mode.
General notes on sensors and successful cycle completion.
Details of the 12 Months Parts and Labour Guarantee and its terms.
Information on activating the free 5 year parts guarantee.
Details on available repair protection plans for longer coverage.
Information about the dedicated helpdesk for technical advice and support.
Contact details for Hotpoint Service, including phone numbers and website.
Information on ordering genuine replacement parts and accessories.
Instructions on how to register the appliance to activate the 5 year guarantee.
Hotpoint's commitment to environmental care and disposal of old appliances.