Hotronic Micro Dry - Safety Instructions for Transportation; Safety Instructions for the Operator (Owner)

To Next Page

To Previous Page

MICRO DRY

 Keep cord away from hot areas or surfaces. Do not

wrap cord around device, as this may results in defects

of the cable or the connections.

 If device cord or plug is damaged or device is not

working properly, return device to authorized Hotronic

dealer or nearest Hotronic distributor.

1.1.3 Safety instructions for transportation

 Avoid knocks and impact (any external force) when

transporting the device.

 Report any transit damage and/or missing parts to the

supplier without delay.

1.1.4 Safety instructions for the User / Operator / Owner

 The user/operator/owner of the device must not make

any changes, additions or modifications to the device

that could affect its safety without authorization from

WINTERSTEIGER.

 The device may only be used if it is in good working

order, used for its intended purpose, taking the safety

instructions and potential risks into consideration after

reading the operating instructions! Faults which could

affect safety shall be repaired immediately.

 If your Micro Dry is not used for long time, unplug it,

clean and store it in a dry place.

 Unplug the Micro Dry after use, before cleaning it; wipe

it with soft damp cloth. Wash by water is not allowed. If

air intake has dust, dirt or lint in it, clean with small, soft

brush.