Hotronic Micro Dry - Technical Details and Operation Procedures; Technical Specifications and Package Contents

13
2. Technical description
2.1 Technical data
Article
MICRO DRY
Article number
01-0100-5205
Micro Dry
Connection data
Input
100-240V
~
50/60Hz 0,5A
Output
12V – 1000mA 12W MAX
Rated current
0,8A
Fuse min. – max.
max. 3A
Protection type
restorable overheat protector (max. 70°C)
2.2 Package content/your delivery
 1 x Micro Dry
 1 x Power cable
 1 x Power plug 220V
 1 x Power plug 110V
 1 x Operating manual
2.3 Functions of the Micro Dry
This product is used to dry footwear (shoes and boots).
3. Before commissioning
3.1 Transport
Check the device for transport damage. Report any damage to the
manufacturer immediately.
4. Operating instructions
 Plug the Micro Dry into any standard 110-230 Volt 60 Hz electrical
household outlets or any standard 12-Volt automotive receptacle using
the proper power cord included.
 With care slide into footwear being attentive not to restrict or block air
flow into fan or restrict or block circulation.
 Do not trap, smother, pinch, or suffocate the air circulation into or out
of footwear. This may cause overheating!
 Do not force the Micro Dry into smaller footwear.
 Leave as much opening at entrance to footwear as attainable being
careful not to restrict or block air flow by any means.